Essex lanes

UKJeeper said:

That's because it's in the footpath closures document, along with footpaths and bridleways.

http://www.nationalgrid.com/NR/rdon...uresoutage2webtablewithhyperlinks20121108.doc

Click to expand...

Couldn't any byways listed in the footpaths and bridleways document...

UKJeeper said:

And two days later?

Click to expand...

what is it that it wont let you post?

mikeyt said:

Couldn't any byways listed in the footpaths and bridleways document...

Click to expand...

Open the document, scroll down to 'Debden' (2nd page). You'll see Debd.75 ("Closed until 3rd march 2013") and link to 'map12'. Click on the map link. You'll see byways 37 and 75 (brown lines).

I've even taken a(nother) screenshot to help you.

mikeyt said:

what is it that it wont let you post?

Click to expand...

I was trying to reply to your post. TBH most of it i can't recall, but i did wonder what the 'definitive map to Hampshire' was doing in relation to my Essex route?

UKJeeper said:

Open the document, scroll down to 'Debden' (2nd page). You'll see Debd.75 ("Closed until 3rd march 2013") and link to 'map12'. Click on the map link. You'll see byways 37 and 75 (brown lines).

I've even taken a(nother) screenshot to help you.

Click to expand...

Ahhh my fault was opening the doc files in txt edit because i use a imac, tried it on pc at workshop and now looks like the screenshot you posted.

I have links saved on where i get byway info from made a link faux pas when posting the link to Hampshire area sorry

Well after a great day out on Sunday my landy is looking abit sorry for itself found out what my bad metal in Metal screeching noise was
First off was

Then fort if check half shafts as it also was knocking Found wheel bearing had fallen to bits

Bizgsi said:

Well after a great day out on Sunday my landy is looking abit sorry for itself found out what my bad metal in Metal screeching noise was
First off was

Then fort if check half shafts as it also was knocking Found wheel bearing had fallen to bits

Click to expand...

wow you will have to keep that wheel bearing as a souvenir probably the wheel bearing failing that knocked out the pads faster....hope you stub axles ok!

Yea I hope it's ok to just waiting for the missus to go out then I will go take it apart I'm going to keep the bearing next to my astras bent valve lol

mikeyt said:

I have links saved on where i get byway info from made a link faux pas when posting the link to Hampshire area sorry

Click to expand...

Nothing wrong with Hampshire. I've been round Slab, Broxhead, Slindon, etc more than a few times. Just not much use for the TOWIE route.

Bizgsi said:

Yea I hope it's ok to just waiting for the missus to go out then I will go take it apart I'm going to keep the bearing next to my astras bent valve lol

Click to expand...

good stuff! i have a little collection of destruction (bent coilovers, bent rods dett'd pistons broken camshafts, snapped crank sheered vernier pulleys the list goes on....) brings back good memorys lol

hope the investigation goes well!

Lol iv started a little collection of broken land rover parts in the garden lol missus loves it not looking to taking it apart just hope it's all ok otherwise more bloody money to spend on it

You will see it when you replace the Bearings.

If the stub axle is fooked then you will need to change it.

Tuskenraider is having my rear Axle and Diff this weekend. Not sure if he needs the ends as well.

If he don't need them I will keep one for you.

Tuskenraider said:

Cool, At least with a Jeep in the group everyone can have a go at recovery practice

Click to expand...

Big Stu 12 said:

Pink Dihastuis are good for that as well.....

But dont tell His MUM

Click to expand...

I thought the same until we went to Wales . Went everywhere we did (lots of water ) but without the fun of fettling.

Discodad said:

I thought the same until we went to Wales . Went everywhere we did (lots of water ) but without the fun of fettling.

Click to expand...

Went everywhere and more remember, we got that video of the bombhole still lol

:doh:
Walks off whistling to himself.

I would love that 110
If was allowed

Well took it apart was a bitch to get off not I fell apart lol


Was very luck this stub axle is ok

Now I need to do the nsr bearing when they turn up
Thanks Brian I will check the over side ASAP

I checked with tuskenraider and he wants the lot so he can do a straight swap.

Sorry.

That's ok mate all is ok ATM, just took it for a drive no more horrible noise, should get another bearing on Monday or Tuesday for the over side then all 4 have been replaced

Fookin hell - never seen a bearing that bad from a road car before! What you have resembles something I've seen offshore that has been in the sea for 15 years!