Does anyone know how much a disco 1 bare body weighs?
- Thread starter Andrewc23
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Not a lot I've cut one in half and rolled it off a chassis on me own.. probably less than 12stone once it's been stripped completely
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Scrap it cut inner wings off then cut in 4 with a recip saw and It'll just about fit into the back of another disco..
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
easy enuff as long as there's two or more. Unboilt everything, remove all panels (they is ally) cut off front inner wings. pull truck along side disco and roll body shell onto truck bed.. Weigh Ally in seperately..
- Posts
- 83,230
- Location
- Embasinga stocæ
yu gonna help me get rid of mine, Pikey?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Aye. Tis easier if ya cut thru pillars top and bottom and remove roof and sides. Yu'll be amazed what small pile it all make once cut up.
- Posts
- 83,230
- Location
- Embasinga stocæ
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
:dthats all right then - most of that has been done.
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
during the summer i broke a d1 300tdi 5 door and i made 3 trips to the scrap metal recycler as i only have a small trailer, anyway my first trip was with the roof cut off from the top of all the posts ( 40kg ) then the rear sides ( double skinned ) and rear boot floor ( 60kg ) and the last trip was with the engine bay, bulkhead, and front and middle rear floor sections, all cut up into 4ft length sections ( 100kg ) obviusly all doors, bonnet, tail gate, and front wings where all sold seperatly so where not weighed in, hope this helps.
- Posts
- 83,230
- Location
- Embasinga stocæ
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
no, weighs alot more, the rear half of myn is just liftable with 2 thats the bare shell. boot door is well hevy too gona b a fair bit imo
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Yes but the original Question was how much does a fully stripped shell weight with all panels and doors removed.. :doh:
Last edited:
MrGrumpy
Member
- Posts
- 48
- Location
- Near Montreal, Quebec, Canada.
Define "Worth".
Is 55 quid in your pocket better than a bare shell in the garden?
I know what Mrs Grumpy would say.
Is 55 quid in your pocket better than a bare shell in the garden?
I know what Mrs Grumpy would say.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
I thought tufty was reducing in size on its own its been left that long its a pile of rust
Similar threads
