Disco2 immobiliser problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

gordonhope1

New Member
Posts
6
Location
biggar
Hi i have just purchased a discovery 2 --2001 reg
The key fob was intermittently working until now :mad: so i changed the receiver up in the roof and that made no difference :confused:

I can start and run with the eka code :) I have read on a post that you can switch off the immobiliser with Faultmate ??
 
gordonhope1 said:
Hi i have just purchased a discovery 2 --2001 reg
The key fob was intermittently working until now :mad: so i changed the receiver up in the roof and that made no difference :confused:

I can start and run with the eka code :) I have read on a post that you can switch off the immobiliser with Faultmate ??
Click to expand...

You can switch it off with a nanocom too. Have you tried changing the battery in the fob? Don't forget to resynch the fob afterwards.

:welcome2: to LZ by the way.
 
Thanks i will try that first and if that fails i think i will just go for the nanacom or find someone in scotland that will do it :) would landrover ??
 
I did speak to a specialist in edinburgh i explained that i was a mechanic and had tried all the different things,they thought it might take a couple of hours labour to diagnose the BCM which i believe is the fault. Maybe i should ask them to just switch it off ... :) Thanks for that ive been skimming through forums for a week scratching my head.
 
You must log in or register to reply here.

Similar threads

P
Freelander 1 L-Series Bosch diesel ECU replacement process?
Replies
8
Views
483
pscan.eu
P
C
D2 2004 td5 no start immobiliser
Replies
1
Views
796
Chips666
C
A
Need someone with a nanocom
Replies
5
Views
862
marjon
marjon
D
D2 Keys... issue
Replies
9
Views
928
sierrafery
sierrafery
G
Td5 central locking (another one)
Replies
3
Views
835
sierrafery
sierrafery
Back
Top