Disco Tray back build

How the hell are you supposed to get the ####ing slave rod clip on!?

hot water helps to make it more flexible, put the rod through it then slide it onto the arm

discomark10 said:

How the hell are you supposed to get the ####ing slave rod clip on!?

Click to expand...

With great difficulty, I used abit of tube over the rod to push it on but it's diddly and I broke 2 trying to do it

I thought about tube also, think ill give it ago with it warmed up also. Cheers guys
Just broke my 1st one :doh: got'a wait for a new one now!

I got two for when I did mine

Jesus it seems to be a pig, not looking forward to doing mine.

Must say the quality of the finish is dodgy - whos the idiots though, Britpart for making teh ****e or suppliers to us for stocking them???? Mate had the same issue, paid for quality stuff only to be sent BP rubbish.

should complain to the suppliers then we might get fed some descent quality parts.

#rantover

Yea.. its not right, I specifically ordered OEM not after market!

Never had a problem with a slave rod clip?????

(Maybe I don't have one fitted?)

discomark10 said:

How the hell are you supposed to get the ####ing slave rod clip on!?

Click to expand...

screw driver after fitting one lug to push other piece of ****

Well after my 66H week I got a min to have another bash at fitting the clutch slave push rod clip.. had a bit of copper pipe in ma tool box which is a lil shorter than the push rod..Perfect!
Bit of a faf, 30min later and tadda! Its in!
Started doing up the bolts and bits only to find the pipe hole is to big!?!?

Might have a metric slave with m10 fitting instead of 3/16"

Well what the hell is that about!? did LR change to m10 or is it the wrong part?

discomark10 said:

Well what the hell is that about!? did LR change to m10 or is it the wrong part?

Click to expand...

I've found that there are different ones before.

So, where do I go from here!? get another salve and hope its the same, get a new pipe or a new length from MC to CC from llama4x4?
Is there a way to tell what format it will be in before ordering?
its the same make and looks the same as the one I removed!

discomark10 said:

So, where do I go from here!? get another salve and hope its the same, get a new pipe or a new length from MC to CC from llama4x4?
Is there a way to tell what format it will be in before ordering?
its the same make and looks the same as the one I removed!

Click to expand...

You could get an adapter

oh, didn't think there is enough space for the treads for an adaptor, but sounds like a brilliant solution!
Thanks

What size would they be?
Research seems to suggest lr used 3/8 (9.5mm ish) and m10 but it seemed like more of a difference that 0.5mm?

they look very similar but don't fit…..I had this problem when setting up my system

200 unf

300 metric

:doh: