Disco cv joint gone no drive now from transfer box
- Thread starter Sproket
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
If you have a broken shaft it will not drive without difflock. It wont jump out as you mention it simply will turn the front axle with least resistance. Difflock will lock the propshafts together and give you drive aslong as both rear wheels have grip.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Half shaft and or CV. You could remove the front propshaft and drive it in difflock. Some people carry a spare drive member that has a hole drilled out bigger than the splines so that you can steer sortof.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
EDIT, if you remove the front propshaft you may find the steering will try and lock up and be dangerous to drive on the road (although I have driven back 30 miles like this before now to get a vehicle home) Round abouts are interesting when the steering locks. Jai
Teflon
New Member
- Posts
- 683
It will probably still drive, but one end of the shaft thats broken will still be being turned with the wheel going round.
Whatever's broken will have dumped bits of shrapnell into the axle casing, so grinding the broken bits together AINT going to make matters any easier to sort out, when you get the parts to look at it....
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
if you only need to get it back remove the propshaft, and remove the drive members from the front (catch the oil with old rags) then difflock in and drive it back to where you can work on it.
Similar threads
