Freelander 1 Diff mount bushes or ball joints?
- Thread starter Scotty381
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
slimboy
Active Member
- Posts
- 207
- Location
- Fareham Hampshire
Hi.
The rear mount on the diff is most likely the problem as they are very prone to failure. I have had to replace mine only last month and its a easy job to do. For a really good guide on how to do them search for Hippo's how to on this forum.
Good luck.
The rear mount on the diff is most likely the problem as they are very prone to failure. I have had to replace mine only last month and its a easy job to do. For a really good guide on how to do them search for Hippo's how to on this forum.
Good luck.
freelance
Well-Known Member
- Posts
- 8,488
- Location
- essex and beyond
Check out the subframe mounting bolts whilst under there
GrumpyGel
Well-Known Member
- Posts
- 25,300
- Location
- Christchurch, New Zealand
Could be the castle moving around in the fishtank?
Rimini-Scott
Active Member
- Posts
- 194
- Location
- Norfolk
I changed my centre diff bush with a poly one last week end, easy to do and my intermittent knock has gone.
Similar threads
Freelander 1
Another rumble, CV joints or IRD?
