odyssey
Active Member
- Posts
- 364
- Location
- Derbyshire
Hi all - LSE's (4.2 V8 - no lpg) been behaving itself very well recently, but to punish me for saying so it's developed a really annoying fault.
It'll start from cold and run perfectly, takes me where I want to go, switch it off; come back 5 mins later and it won't start. Cranks but no spark, no fuel injection. This has happened a few times, and I've jiggled, cleaned, replugged LT connections in various order, and it will suddenly come back, with no consistencey as to which wire has been moved.
Once it starts it's fine, never misfires, hesitates, or stalls. It'll run perfectly for several days, then suddenly not start.
Just been and tried the Rave ignition LT diagnostic tests with the following results.
TEST 2
1) Batt volts - 11.99v. I know it's a little low but it's been cranking while I've been trying. Batt only 9months old.
2&3) Batt -ve to coil neg & pos - both 11.87v - within range
3) amp earth to earth - 0v. - within range
TEST 3
Ign off - Batt +ve to coil -ve - it's 11.99v - should be 0v
Ign on - Batt +ve to coil -ve - 11.99v - should still be 0v EDIT just been to check and ign on - it's 0.17v
This seems to be the problem but rave doesn't offer any diagnosis.
There's continuity between the coil neg and the amp plug. Coil is new - replaced trying to solve this.
Before I take the dizzy out for the rest of the tests, can anyone suggest what's the problem - pleeaase?
TIA - Alastair
It'll start from cold and run perfectly, takes me where I want to go, switch it off; come back 5 mins later and it won't start. Cranks but no spark, no fuel injection. This has happened a few times, and I've jiggled, cleaned, replugged LT connections in various order, and it will suddenly come back, with no consistencey as to which wire has been moved.
Once it starts it's fine, never misfires, hesitates, or stalls. It'll run perfectly for several days, then suddenly not start.
Just been and tried the Rave ignition LT diagnostic tests with the following results.
TEST 2
1) Batt volts - 11.99v. I know it's a little low but it's been cranking while I've been trying. Batt only 9months old.
2&3) Batt -ve to coil neg & pos - both 11.87v - within range
3) amp earth to earth - 0v. - within range
TEST 3
Ign off - Batt +ve to coil -ve - it's 11.99v - should be 0v
Ign on - Batt +ve to coil -ve - 11.99v - should still be 0v EDIT just been to check and ign on - it's 0.17v
This seems to be the problem but rave doesn't offer any diagnosis.
There's continuity between the coil neg and the amp plug. Coil is new - replaced trying to solve this.
Before I take the dizzy out for the rest of the tests, can anyone suggest what's the problem - pleeaase?
TIA - Alastair
Last edited: