axle breathers

Just got all the gear to extend my axle breather pipes to the top of the snorkel can anyone tell me were the existing ones go ? cant find the open end can see it dissapear around the bulkhead.

Any help greatly aprreciated.

thanks

There's 3 between bulkhead and engine ends curved ove look like waking sticks rear axle one just about 3 foot long just tucked up under body

cheers mate

is there just one pipe fitting coming from the front axle ? and were abouts is trhe gearbox breather ?

all 3 are grouped together at the back of the engine bay, like he said, walking stick like things. one from front axle, one from transfer and one from gearbox.

right sound lads take it there all 1/8 bsp thread ???

Finnaly got the out lol couldn't hell find were the gearbox breather was any suggestion were to re route these to the top of the snorkel??

I just used the existing pipes for the T/B and G/B a 2-1 connector and a bit more pipe.

I also used a 2-1 for both Axles, and then one final 2-1 just behind the wing so theres only one pipe coming up the snork.

Same as tim exstend gb tb I've got mine conexted into to 2 pipes up side of snorkle one pipes 4-1 secend pipes for timing case breather

Well ivw got the transfer and gearbox teed straight off with s/steel hose around 6mm air pipe and managed to get both acles to the same point so i now have 2 pipes coming out the dash were abouts is the timing case breather ??

G19RVY said:

Well ivw got the transfer and gearbox teed straight off with s/steel hose around 6mm air pipe and managed to get both acles to the same point so i now have 2 pipes coming out the dash were abouts is the timing case breather ??

Click to expand...

it should be on the front but they don't all have one, mine doesn't. you can get a replacement plate with a pushfit connection

It comes in some kits or you can buy it on its own

G19RVY said:

http://<a href="http://s1272.photobucket.com/albums/y389/ollyduke13/?action=view&current=null_zps8e2bcee5.jpg" target="_blank"><img src="http://i1272.photobucket.com/albums/y389/ollyduke13/null_zps8e2bcee5.jpg" border="0" alt="Photobucket Pictures, Images and Photos" /></a>

Click to expand...

That aint worked. Photobucket is becoming a pain in the arse

The one on my rear axle has sheared off!!

Must be some way of getting it out, as the EasyOut has snapped off inside what's left of it ... ??

Oldseadog said:

The one on my rear axle has sheared off!!

Must be some way of getting it out, as the EasyOut has snapped off inside what's left of it ... ??

Click to expand...

mine did the same on me taped mine round with a small screw driver

Cheers for that. I'll give that a try when I get some time!

Cheers lads al hVe a look see if its got one tonight but if its not there dont replace it

Also anything else i need to do before deep wading ? Cheers

G19RVY said:

Cheers lads al hVe a look see if its got one tonight but if its not there dont replace it

Also anything else i need to do before deep wading ? Cheers

Click to expand...

yes fit wading plugs

G19RVY said:

Cheers lads al hVe a look see if its got one tonight but if its not there dont replace it

Also anything else i need to do before deep wading ? Cheers

Click to expand...

Find some water, and don't try the Tyne up by Ryton unless it's a very low tide!

Wading plugs to the gb and tb ?? Are they the open ports underneath ?

Aye hoping it doent cover the roof derwent river should be alright