axle breathers
- Thread starter G19RVY
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
There's 3 between bulkhead and engine ends curved ove look like waking sticks rear axle one just about 3 foot long just tucked up under body
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
all 3 are grouped together at the back of the engine bay, like he said, walking stick like things. one from front axle, one from transfer and one from gearbox.
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
I just used the existing pipes for the T/B and G/B a 2-1 connector and a bit more pipe.
I also used a 2-1 for both Axles, and then one final 2-1 just behind the wing so theres only one pipe coming up the snork.
I also used a 2-1 for both Axles, and then one final 2-1 just behind the wing so theres only one pipe coming up the snork.
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
Same as tim exstend gb tb I've got mine conexted into to 2 pipes up side of snorkle one pipes 4-1 secend pipes for timing case breather
OxonLandy
Active Member
- Posts
- 574
- Location
- nr Abingdon, Oxon
it should be on the front but they don't all have one, mine doesn't. you can get a replacement plate with a pushfit connection
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
It comes in some kits or you can buy it on its own
- Posts
- 45,213
- Location
- Hornchurch
That aint worked. Photobucket is becoming a pain in the arse
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
mine did the same on me taped mine round with a small screw driver
defender11069
AKA Mr cool...
- Posts
- 8,616
- Location
- up sh*t creek with out a paddle
Cheers lads al hVe a look see if its got one tonight but if its not there dont replace it
Also anything else i need to do before deep wading ? Cheers
yes fit wading plugs
Find some water, and don't try the Tyne up by Ryton unless it's a very low tide!Cheers lads al hVe a look see if its got one tonight but if its not there dont replace it
Also anything else i need to do before deep wading ? Cheers
Similar threads
