Also not sure if that is kinda confusing might make a video when I get home in about 30 minutes and post the link
Do you know what part I would need. Here's a picture of what I'm talking about in that position the 3rd fan speed will work and if I push the switch part to the right with some pressure the forth fan speed will work it started out where the 3rd speed would work just fine where it's supposed to and the forth would work but every once and a while I would hit a big bump and it would just stop workingYou have the same heater system as the early Discovery, this link will give you some part numbers. http://www.allbrit.de/UNI.cfm?SPRACHE=EN&PAGE=808148
And Welcome to the Discovery Forum
That looks like the later 300 series dash heater switch, therefore the link I gave you isn't any good.
Pull the rotary knobs off you will see a couple of screws or so, remove the screws as well the knob for the blower slider switch and the front plate of the dash can be removed, then the four screws, one on each corner of the heater control panel if u need to.
Ok so I basically have to take the entire front part of the dash off to get it out... I will defiantly leave that for a later down the road thing as it is my daily driver.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
