3bolt/4bolt flange differences

gjudge · Dec 31, 2012

Been trying to swap the 2 flanges over today, got the mega tight bolt off at work, pulled the flange off the 3 bolt....

06E5F131-47BC-40D1-B64D-C65D1DEC8BE3-11874-00000DC9B9F6E2BF.jpg

Then i pulled the 4 bolt flange off....

911215D4-9114-429C-A655-306A13198788-11874-00000DC9B365F7B9-1.jpg

Not gonna be able to swap these around!!

Just gonna bite the bullet and get a 3 bolt prop with a doughnut....

wiltshire landyman · Dec 31, 2012

u sure u aint got a 10 spline and a 24 spline diff there

Pikey · Dec 31, 2012

He has top one is 24spline bottom one is 10spline.

gjudge · Dec 31, 2012

wiltshire landyman said:
u sure u aint got a 10 spline and a 24 spline diff there

I have, i was under the impression that the 2 flanges could be swapped?

200tdi ayre · Dec 31, 2012

You can get them but they are not the commonest of things, took me a week to find one and I know a fair few breakers

200tdi ayre · Dec 31, 2012

I might have one lying about somewhere actually

phil540uk · Dec 31, 2012

Just buy a new 4 bolt flange, they're only about £25.

gjudge · Dec 31, 2012

So i can buy a 4 bolt flange that will fit to the 300tdi diff ?

200tdi ayre · Dec 31, 2012

gjudge · Dec 31, 2012

200tdi ayre said:

Wanna sell it

200tdi ayre · Dec 31, 2012

gjudge said:
Wanna sell it

£20 posted ?

gjudge · Dec 31, 2012

200tdi ayre said:
£20 posted ?

Sounds good to me! Paypal ? Pm your email address!

Cheers !

discool · Dec 31, 2012

Remember some vehicles require a pinion spacer

200tdi ayre · Dec 31, 2012

Sorted mate even shot blasted it for ya

MPfive · Dec 31, 2012

discool said:
Remember some vehicles require a pinion spacer

+1 we don't want another helmet not listerning

phil540uk · Dec 31, 2012

gjudge said:
So i can buy a 4 bolt flange that will fit to the 300tdi diff ?

Yes, you can get it as a kit with the seal too:
Rear Differential Flange Kit (4-Bolt) STC4858 Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.

phil540uk · Dec 31, 2012

200tdi ayre said:

Might be the angle, but that looks like the short flange that will need a pinion spacer too.

discool · Dec 31, 2012

Yes 4 bolt flanges fit a 300tdi diff, it's the same diff as fitted to the V8 and the later V8s have a 4 bolt flange as standard.

200tdi ayre · Dec 31, 2012

DW I've sent the spacer too

3bolt/4bolt flange differences

gjudge

Active Member

wiltshire landyman

I’m back

Pikey

Dummy Ejection Facilitator..

gjudge

Active Member

200tdi ayre

Well-Known Member

200tdi ayre

Well-Known Member

phil540uk

Active Member

gjudge

Active Member

200tdi ayre

Well-Known Member

gjudge

Active Member

200tdi ayre

Well-Known Member

gjudge

Active Member

discool

Well-Known Member

200tdi ayre

Well-Known Member

MPfive

Active Member

phil540uk

Active Member

phil540uk

Active Member

discool

Well-Known Member

200tdi ayre

Well-Known Member

Similar threads