3bolt/4bolt flange differences

[gjudge]

Been trying to swap the 2 flanges over today, got the mega tight bolt off at work, pulled the flange off the 3 bolt....

Then i pulled the 4 bolt flange off....

Not gonna be able to swap these around!!

Just gonna bite the bullet and get a 3 bolt prop with a doughnut....

 

[wiltshire landyman]

u sure u aint got a 10 spline and a 24 spline diff there

 

[Pikey]

He has top one is 24spline bottom one is 10spline.

 

[gjudge]

u sure u aint got a 10 spline and a 24 spline diff there

I have, i was under the impression that the 2 flanges could be swapped?

 

[200tdi ayre]

You can get them but they are not the commonest of things, took me a week to find one and I know a fair few breakers

 

[200tdi ayre]

I might have one lying about somewhere actually

 

[phil540uk]

Just buy a new 4 bolt flange, they're only about £25.

 

[gjudge]

So i can buy a 4 bolt flange that will fit to the 300tdi diff ?

 

[200tdi ayre]

 

[gjudge]

Wanna sell it

 

[200tdi ayre]

Wanna sell it

£20 posted ?

 

[gjudge]

£20 posted ?

Sounds good to me! Paypal ? Pm your email address!

Cheers !

 

[discool]

Remember some vehicles require a pinion spacer

 

[200tdi ayre]

Sorted mate even shot blasted it for ya

 

[MPfive]

Remember some vehicles require a pinion spacer

+1 we don't want another helmet not listerning

 

[phil540uk]

So i can buy a 4 bolt flange that will fit to the 300tdi diff ?

Yes, you can get it as a kit with the seal too:
Rear Differential Flange Kit (4-Bolt) STC4858 Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.

 

[phil540uk]

Might be the angle, but that looks like the short flange that will need a pinion spacer too.

 

[discool]

Yes 4 bolt flanges fit a 300tdi diff, it's the same diff as fitted to the V8 and the later V8s have a 4 bolt flange as standard.

 

[200tdi ayre]

DW I've sent the spacer too