the fob receiver is just under the plastic trim behind the rear seat, on the right hand side. Where you press to fold the rear seat forwardI meant before it stopped working
Read the code on the windscreen lower n/s lip. Take that to a dealer he should be able to provide EKA code. If you owned a Nanocom and knew how to use it you could disable immobiliser and need for EKA to start car. The fob is out of sync it will do that if you take longer than ten mins to change batteries. It CANNOT be resynced until EKA code has been entered and accepted by the system. If you lock with fob and unlock with key you will always get engine immobilised message.
Yep EAS manual springs fitted and ECU disabled.
Dash pixel problem?
thought so, hows things Tony?
And photo ID.
Rough but improving. Thanks for asking.thought so, hows things Tony?
And the aerial is the blue wire.I meant before it stopped working
thought so, hows things Tony?
It’s all sorted now! I had knocked the engine cut off switch when cleaning the car.
there you go!
Not enough tea bagging for clarity!!Didn't you guess Mark? Crystal ball not in focus?
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
