Wolf Pack
Active Member
- Posts
- 320
- Location
- Portsmouth
So I checked what screws I need for this stage of the reassembly and the vent control is secured by two DA610051L, No. 10 screws.
So a 4.5mm screw floats around in a 9.5mm hole in the control body.
What am I missing here?
Why is so much lateral movement required?
TIA.
So a 4.5mm screw floats around in a 9.5mm hole in the control body.
What am I missing here?
Why is so much lateral movement required?
TIA.
