Window switch pack, Repair?

[Shodi]

Hi Guys, Has anyone ever managed a repair on the cubby switch pack? mine appears to have died, been off the road a while and I was putting it back together today only to discover the switch's are not working, Climate display not working either but still operational

 

[Datatek]

Hi Guys, Has anyone ever managed a repair on the cubby switch pack? mine appears to have died, been off the road a while and I was putting it back together today only to discover the switch's are not working, Climate display not working either but still operational

Sounds like your car is wet inside.
Switch packs have been fixed with contact cleaner etc.

 

[Shodi]

Hi, yes it is a tad damp, was working last week when it was put into the garage, finished the work reconnected the battery and Oh F oops... no power to windows, I'll whip out the panel and dry it out, get some heat through the car too. Thanks Datatek

 

[Datatek]

Hi, yes it is a tad damp, was working last week when it was put into the garage, finished the work reconnected the battery and Oh F oops... no power to windows, I'll whip out the panel and dry it out, get some heat through the car too. Thanks Datatek

Dry the car before the BECM dies and all the connectors corrode

 

[Shodi]

Its not soaking, but been out of use AGAIN for a wee while and a touch damp, will get the heater into it and once road taxed i'll give it a good run.... with the windows up lol

 

[Datatek]

Its not soaking, but been out of use AGAIN for a wee while and a touch damp, will get the heater into it and once road taxed i'll give it a good run.... with the windows up lol

Damp is all it needs to feck things. Use the aircon to pull the water out.

 

[Shodi]

Cheers will do, I now have the switch pack out, it had a greasy/dampish film with dust and pet hair on the switch side surface, signs of damp under cubby where pack was removed

 

[Datatek]

Cheers will do, I now have the switch pack out, it had a greasy/dampish film with dust and pet hair on the switch side surface, signs of damp under cubby where pack was removed

 

[Shodi]

Hopefully repairable, else it will be more of the hard earned on the green goddess :jaw:

 

[Shodi]

After a good warm 2.5 hr run with aircon the hevac display is now 100% but the switch pack after a clean with moisture repellant elec spray and a dry out warm indoors, never regained conscious and was pronounce D.O.A on return.... Oh well wallet out again

 

[Datatek]

After a good warm 2.5 hr run with aircon the hevac display is now 100% but the switch pack after a clean with moisture repellant elec spray and a dry out warm indoors, never regained conscious and was pronounce D.O.A on return.... Oh well wallet out again

I believe the switch pack can be dismantled and the solder joints checked.

 

[Shodi]

I've got it out of the case, so might as well have a go before replacing it.
:crazy_driver:

 

[dogsbody]

I've got it out of the case, so might as well have a go before replacing it.
:crazy_driver:

It's certainly repairable, I've stripped and repaired individual switches.

 

[Shodi]

It's certainly repairable, I've stripped and repaired individual switches.

Its completely dead though, not just one window

 

[Datatek]

Its completely dead though, not just one window

That is often the case. I assume you have checked for power?

 

[Shodi]

That is often the case. I assume you have checked for power?

Only in so far as the back light is working and all fuses are ok

 

[martyuk]

I'm looking for a completely dead switchpack to see if I can find what has faulted/if it's repairable.. If you get a replacement one and are just going to chuck the old one out, then I'm happy to pay postage for it... Dunno if I can find a way of fixing it if it's a main chip issue, but want to give it a go...

 

[Rachelkgr]

One switch just packed up on mine today! Hawkeye can open and close window! So switch pack out tomorrow and some contact cleaner!

 

[Shodi]

Went over all solder joints and still dead, new one i think :-(

 

[Shodi]

That is often the case. I assume you have checked for power?

I did eventually get round to putting a tester to it, 12v present at pin one, hope replacing the pack works and i'll get the car dried out ASAP