handbrake adjustment

[danchapman2k2]

Where is the transmission drum located?

Mine only holds on last click so adjustment is needed

 

[The Mad Hat Man]

in front of the rear prop.

 

[danchapman2k2]

Thanks mate searches say just a 17mm spanner to adjust n it's done

 

[Dippypud]

Thanks mate searches say just a 17mm spanner to adjust n it's done

Square nut on the rear (T-box side) of drum ...

Tighten until it just starts to bind, you can feel this by rotating the drum by hand, then back off 1/4 of a turn till it turns freely...

 

[jamesmartin]

Thanks mate searches say just a 17mm spanner to adjust n it's done

300tdi you are better with 17mm socket ,adjust shoes then cable

 

[Dippypud]

300tdi you are better with 17mm socket ,adjust shoes then cable

Oh, it's a 300 -

Firstly chock a wheel and lift one from the ground (not the chocked one)

Next, loosen the cable adjuster located under the centre console to give the cable some free play (black nylon nut which the cable passes through).

Adjust the shoes with the 17mm bolt, as previously said ...

Back under the centre console to the cable adjuster, tighten until hand brake travel is around three clicks...

 

[danchapman2k2]

How do I get under the console lads from in the cab or outside

 

[jamesmartin]

remove window switch panel

 

[Dippypud]

How do I get under the console lads from in the cab or outside

In cab, remove the two screws under the 'mat' in front of the high/low range selector, remove the high/low and standard gear change knobs and gaiters, remove the electric window switch panel... and the screws in the 'cubby box'...

Unclip the gaiter for the handbrake, you'll see the pivot pin and it's circlip, remove circlip, pull the pin out that connects the handbrake lever to the cable, then you can lift the handbrake lever up enough to get the console over it...

 

[danchapman2k2]

Dippypud your a man of total knowledge much appreciated everyone. Now where is my screwdriver

 

[discool]

Where is the transmission drum located?

Mine only holds on last click so adjustment is needed

What is the problem then? as long as the brake holds and releases ok.

Is it you just like more clicks to engage the shoes, my old RR had only one click the time I had it, my disco has three clicks neither have been a problem for me and never has the discos cable been or required adjusting.

 

[blue beasty]

Dippypud your a man of total knowledge much appreciated everyone. Now where is my screwdriver

Thats gonna come as a bit of a shock to Buffalo knight

 

[blue beasty]

What is the problem then? as long as the brake holds and releases ok.

Is it you just like more clicks to engage the shoes, my old RR had only one click the time I had it, my disco has three clicks neither have been a problem for me and never has the discos cable been or required adjusting.

You need spare clicks for an mot

 

[jamesmartin]

What is the problem then? as long as the brake holds and releases ok.

Is it you just like more clicks to engage the shoes, my old RR had only one click the time I had it, my disco has three clicks neither have been a problem for me and never has the discos cable been or required adjusting.

youve been lucky then because nearly every disco i come across needs adjusting

 

[discool]

You need spare clicks for an mot

Now you don't see that mentioned in the online MOT Testers Manual.

 

[discool]

youve been lucky then because nearly every disco i come across needs adjusting

That's all right then, I didn't think for a moment I was the only one.

 

[danchapman2k2]

Well it holds but lever is vertical so Def needs adjustment. Why does it need to be jacked on one wheel

 

[discool]

So you do have an issue with the cable, the clicks would normally start just up from the hand brake off position and no jacking up of the vehicle is required just roll under, easy with your 'lifted disco'.

 

[Dippypud]

Dippypud your a man of total knowledge much appreciated everyone. Now where is my screwdriver

I is a Doris, but don't you worry your little head about it ...

Thats gonna come as a bit of a shock to Buffaloknight

****, I was hoping to keep the secret a little longer ...

 

[danchapman2k2]

That the old reason said about lifting is to get under it. Fair enough.

Sorry dippypud apologies there. And thanks again for the assistance. Still very unknown but least have half an idea now