Help 4.6 won't start after new head gaskets

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

capriv6man

New Member
Posts
7
Hello, can anyone please help? Just done the head gaskets
On my 97 4.6 now it won't start it just clicks like a flat battery
Or knackered starter, it will sometimes turn over very
Slowly then stops and just clicks again.
I've checked all elec connections they seem fine the battery is
Is fully charged, I've changed the starter motor
and the engine spins freely by hand.

I am now totally at a loss.

Thanks Geoff
 
Cheers for the help it was the engine to body earth,
It's a dark art to me this elastictrickery.
Again thanks for your help
 
You're lucky it didn't have a good enough earth to energise the solenoid and attempt to start. Pulling the starter current through the rest of the incidental wiring could have blown countless ecus and fuses.
 
You're lucky it didn't have a good enough earth to energise the solenoid and attempt to start. Pulling the starter current through the rest of the incidental wiring could have blown countless ecus and fuses.

Discos with a bad engine earth usually earth through the hand brake cable, melting the inner nylon liner. Handbrake becomes somewhat stiff. That's if you can move it at all. :D:D
 
Back
Top