Search results

Hi all, I have had a bit of a workshop clear out and have a few bits to get shot of. Here we have new parts for a Range Rover Classic -Radius Arm kit including: 4 x Bushes - NTC 6860 4 x Bolts - BX116201L 4 x Nyloc Nuts - NY 120041L 4 x Chassis Bush All new and in packaging. No...

Hi all, I have a few RR classic bits for sale. RR classic v8 - Set of 8 spark plugs - new and boxed - RTC 3812 Radius arm kit: 4 x Bolts 4 x Nuts 4 x Bush (front) NTC 6860 4 x Bush (rear) NRC 4514 2 x Nuts NY 120041L All new and still in the sealed packaging. ECU - LRZ149 - V8 3.9 - used...

Hi all, My mate has a 52 plate TD4 which has a flat/dead spot at about 70mph in top. It seems to rev and run up to this point but will intermittently hit a real dead spot. The only way to get aorund it is to lift off and decrease speed and then creep up again? Any ideas please? Thanks, W

Hi, I have a RRc and I have replaced the standard alloys with some steel wheels and BFG's. The result - killer whell wobble / vibration. Now, I've had all teh wheels balanced, checked pressures, wear, and all the obvious things. I think that the problem may be that I've just used the old...

Hi. I have just developed a leak in the rad of my '92 RRC 3.9. Latest in a long line of hassles!! I haven't the time to get to it just now but was wondering if I should risk trying to use something like Rad Weld as a short term fix?? Is this stuff safe to use or will I just be storing up...

Hi, I have a 92 RRC 3.9 V8. The ABS light is on. Blink test tells me the stop light switch is the cause. Tried to adjust - got nowhere. Bought a new one but still the same issue. Blink gives me 2-6 stop light switch. Driving me nuts - so really appreciate any ideas??? Thx W

HI all, I can't find my Haynes noddies guide so... Can anyone give me the procedure to check the ABS blink codes for a RRC 3.9 V8 please. I need to know: - which relay to pull - I think i need to link the black to the black and pink wire?? - And then........ Anyone pleeeeeeese:doh:

Hi, I have a RRC 3.9 V8 and the ABS light is on permanently. I've had a quick check and the only obvious issue is that one of the wires for the OSF wear indcators is broken. This wouldn't be the problem would it?? Pump doesn't run for any longer than normal (few seconds), brakes seem dandy and...

Hi all, I have a '92 RRC 3.9 V8 that has recently had a head gasket. Since, it runs rough on LPG and petrol. Idles ok but struggles under revs? I've checked all the obvious ignition, fuel supply side of things and everything appears to be ok. Any ideas? Thx

Hi, My RRC has come back from having some work done and I have real problems with some of the vaccum hoses. Can anyone tell me where the vaccum hose that comes off the throttle assembly goes to? At the moment it goes nowhere. Also, there is what seems to be a vaccum hose that comes out...

HI, Just had osme work done and had a hot running problem ever since! I think that the issue is with the fuel pressure reg at the back of the block close to the bulkhead? There is a vacuum hose coming of the regulator but it's hanging free! I can't see where this goes and it's not obvious on...

Hi, I'd like to get four wheels and tyres from Sudbury, Suffolk to Somerset? Anyone going in this general direction anytime soon? Thanks, W

Hi - has anyone got any feedback on MJ Auto factors in Wales? I was thinking about buying some tyres from them but wanted to know if anyone has any knowledge of them etc?? Thanks,

Can anyone help me out with an LPG problem. RRC 3.9 with an LPG kit whuich has always worked well. Had a bit of work done at a local garage and now it's back have discovered a water leak from the vaporiser. Not a great job. Can someone explain the connections to the vaporiser for me, where...

You can all take the p***, but; '92 RRC 3.9 EFI. There is a gizmo which sits on the RHS inner wing between the coil and the washer bottle. Looks like a pump of some sort, with a couple of hoses and couple of electrical connections. I have water leak from here abouts, but I have no clue what it...

Hi all, You know when we were all kids and we clipped a bit of card onto our bike forks so that it made a really cool sound? Well, that's the noise that my fan heater has started to make, only it doesn't seem quite to cool now! I guess that something has moved / is interferring somehow - but...

I have A '92 RRC 3.9 which has decided to pop the timing cover gasket - so a spectacular water leak and lots of steam. What would you guess that it would cost to get this sorted by a sensible workshop? Any ideas? Also, any suggestions of who to go to get the work done. I'm in Somerset near...

Hi, I have a RRC 3.9 which was just dandy until it decided to drop all it's coolant today and leave me with a bloomin long cold walk! It seems to be coming, at spectacular speed from up behind the steering pump though? Any ideas on where this may be actually coming from. It fires out so fast...

Hi, I have a 1992 RRC 3.9. What other Land Rover wheels will be a straight replacement? I'm after replacement tyres but it would be helpful to know what wheels will bolt straight on. Also interested to know if anyone has anything suitable lurkin in their garage? Thanks, W

Hi, I have a RRC 3.9 that was running just dandy two days ago - but just plain refuses to start today. Turns over fine but won't fire. What's the simplest way to cheeck fuel delivery - the electrics all seem ok? Any ideas? Thanks, W