Rrc abs -arghhhhhh

Walshie · Apr 23, 2010

Hi,
I have a 92 RRC 3.9 V8.
The ABS light is on. Blink test tells me the stop light switch is the cause.
Tried to adjust - got nowhere. Bought a new one but still the same issue.
Blink gives me 2-6 stop light switch.

Driving me nuts - so really appreciate any ideas???
Thx
W

wammers · Apr 23, 2010

Walshie said:
Hi,
I have a 92 RRC 3.9 V8.
The ABS light is on. Blink test tells me the stop light switch is the cause.
Tried to adjust - got nowhere. Bought a new one but still the same issue.
Blink gives me 2-6 stop light switch.

Driving me nuts - so really appreciate any ideas???
Thx
W

Stop blinking then and check abs sensor plug wiring and sensors for correct positioning.

Walshie · Apr 23, 2010

Thanks - but this is amateur corner!!
How do I check the sensor positions?

ssmn1234 · Apr 23, 2010

wammers said:
Stop blinking then and check abs sensor plug wiring and sensors for correct positioning.

get under vehicle, locate the sensors on top of axle just inside wheel, they should have a electrical cable attached. using something blunt, softly tap each one down until you feel it bottom-out, then take it for a run. Could also be one of the wheel bearings a tad loose also, especially the rear bearings they need to be adjusted spot-on, with absolutely no play at all.

Khryztal · Apr 23, 2010

2-6 stop light switch

faulty switch or wiring. Fuse A5 blown or not fitted.

check pedal return or wiring/switch

Rrc abs -arghhhhhh

Walshie

New Member

wammers

No longer with us, RIP

Walshie

New Member

ssmn1234

Active Member

Khryztal

New Member

Similar threads