RRC ABS light

Hi,
I have a RRC 3.9 V8 and the ABS light is on permanently.
I've had a quick check and the only obvious issue is that one of the wires for the OSF wear indcators is broken. This wouldn't be the problem would it??

Pump doesn't run for any longer than normal (few seconds), brakes seem dandy and no visible leaks etc??

Any ideas please?
Thanks.
W

Sounds like a problem I had/ still got.

Get the flash code from the ABS ecu.
Bet you have a problem with the O/S/F sensor. 9/10 its that one.

If you know how to get code ignore this bit.

With igntion off, Remove ABS relay. Locate diagnostic plug. Both under passenger front seat. Link black wire with black and pink wire.

Turn on igntion and count the flashes. This gives you the diagnostic report.
Do this test more tahn once as it can hold quite a few fault codes.

If you have haynes manual it's in there.

Where abouts are you? Probably someone local who can help

Thanks - that's helpful.
I will have aplay tonight and see where it get to!