Search results

Hi all, Sorry for posting the 1millionth eas thread Rebuilt the vavle block and compressor and now car won't rise at all. Output is not very good on compressor Took apart again, it contained lots of white bits Compressor runs continuously When compressor is running air comes out of port 11 Is...

Hi all, we have developed a new problem whereby there is a bad juddering accompanied by a squeaking sound which sounds almost like a fan belt but is movement related not engine related, the noise stops under power but returns when you take your foot off. I have some thoughts, I you guys have...

Hi all, had to do a compression test which of course requires disconnecting the stop solenoid, now the car wont start, had this before years ago but i cannot remember what i did to get it going, any help appreciated, cheers.

Hello, I'm looking for some wrap over Roof bars for a 2005 Freelander mark 1. 3 door. Cannot find any on ebay etc. Can anyone help. Looking to spend as little as possible of course. Picture to show the type I'm looking for. Thanks in advance

Hi I am after the speaker that sits on the back of the clocks on a p38, mine is missing, cheers.

Hi all, well after two and half years without one i have finally succumbed and bought another :D it seems ok so far but then it is early yet. One issue is that the indicators don't make any noise? Cheers!

Hi all, is it possible to fit factory headrest screens to a car that does not have them? Cheers!

Wanted P38 Diesel fan, blades not required just the middle bit, I am in Newquay, Cornwall, cheers.

I am after a P38 diesel No4 injector (the one with the wire) it is the later one, many thanks, I am near Newquay in Cornwall.

Dear all, apologies if this has already been covered elsewhere but it seems quite specific, so recently the radiator hoses would remain hard even after a whole day standing and were starting to work their way off the radiator. Upon undoing the expansion tank cap the pressure would release. So I...

Dear all, after changing the steering box (p38 diesel) where the pipes join the box at the top it leaks, there are two seals per pipe but Land Rover only stock the seals for the larger pipe, not the smaller one. Does anybody know of somewhere that might sell them and would copper washers be...

I couldn't find anything in RAVE regarding this so I put it out there, I have an oil leak from the vacuum pump, I've checked and its not the cam cover so does anyone know how you go about removing it and changing any seal within? Cheers!

Hello, I currently run a diesel p38 with derv and waste veg oil, how often should I change the fuel filter? Many thanks.

Hi all, I just had a few quick questions if anyone can help, firstly I've got an oil leak at the front of the engine (p38 diesel) it seems to be coming from the auxiliary belt tensioner is this possible and should the tensioner seem loose it's the part wit the large Allen in the front. Also...

Hello all, some time ago I accidentally positively charged my engine ecu which resulting in the car not starting, this issue was resolved by earthing the ecu to the body. Now, quite randomly, the car just refused to start, no ignition, nothing, now I changed the fob batteries thinking it could...

Hello, basically if I leave the car with a window open for the dog, and lock up using the key, sometimes I'll come back to find the window shut and other times still open. I am not using lazy locking btw. Any help would be appreciated, I have tried the manual and searches but with no joy.

Hi all, I currently have an issue where I am leaking oil from the top of the dipstick, there is some smoke from the filler cap when opened running and you can feel the breathing from the cam cover to inlet hose, are there any other breathers on the engine, I didn't know if those black pipes that...

Hello all, Sorry to create another eka thread but I had a question with regards to eka entry, when you enter the final unlock should all the doors unlock not just the drivers? I have the weird situation where the key code lockout message goes but not all doors unlock and the alarm goes when you...

Hello all, is it possible to swap the internals of one wing mirror to another? The reason I ask is that I have a 6pin mirror on my car but the car is 10 pin, I have a 10 pin mirror but the skin is black metal whereas the ones on the car are plastic. Any help greatly appreciated.

Hi all, I tried a search but couldn't find anything, the coolant level seems to be dropping a little over a few days, the system has been pressure and sniff tested which revealed a dodgy cap which I've replaced. There isn't any visible leaks so I a little lost, any help appreciated.