Search results

Theres roads where I will hit the puddles fast but thats cause I know they arnt too deep and the only thing im going to damage is the 90 or my self lol . Knowing my luck my 90 with a snorkel would get stuck and the wife would drive past in her stock d2 waving lol

At what point did it **** up it looks like it didnt get deep enough to get the air intake under water unless its in a silly place, Also im sure ive seen a p38 with a snorkle Idiots lol

I replaced my timming belt ( reason for having the front off) Water pump - unknown age New belts - whilst your there New rad - mine had less fins than a 1 finned goldfish!!! Cleaned out the intercooler - had to be removed for the rad fitted my natulis horn . Check all pipe work and...

MOD vehicles are well looked after mechanically but thats about it, they arent used for show ;) 3-4 k should give you a nice area to look at especialy 90 wise. was looking at a 2004 ex utillity 110 last night for around that.

fnd that lead flasher tape is good for noise and foam matting / rubber is good for insulation, add the two together and its great!!

Still got the drain bung on the intake ???

I can not belive NO ONE has said its already been done, Those fancy air intakes on the side of newer ( 300Tdi I think) MOD wagons have a float in them ;) Nowt new just fooking expensive.

Dare say you give an MOT tester 30 mins with the lass in your GIF then it would pass ;)

5ft of water ive had our Atlantic 75 in less and our Trent class offshore lifeboat in 6ft of water!!!!!!! Far too deep for a wagon on an open course ( unlike a pay and play site) about 18 inch of water can and will knock some one off their feet let alone on uneven ever changing ground, thats...

NEVER run vents in the wagon. Even thou you are 10' from the source I would not be surprised if you get the odd bit of oil mist coming out of the vents. What style snorkel you got ??

If its like mine then NOPE and you have a breather. I would say a latex clove over it T-wrapped to the neck would probably be possible to seal the filler neck. Front Axel, Rear Axel, Engine timing case, Engine, Gearbox, Transfer box not 100% Fuel Tank All have breathers of one form...

If you want a comparison, Im picking up our new D2 this weekend, 99,000 miles 2003 td5 METROPOLIS Which land rover put every toy they could find in it, Full service history 7 seats, Never been messed with every thing works. We have got that for £6000. The average price for the...

You sure you haven't just been working on Radio Landys, As ive looked at several MOD landys and alot of the NON Radio ones only had one battery and where 12V and even some of the radio ones had 12V vehicle systems and 24v military systems.

So whos going to be the smart arse and tell us what time it was taken by the shadow lol :cool: Wasnt me :rolleyes:

There is a garage the MRs took our old golf to when I was offshore, She waited and watched him almost hammer a screw driver through the sills and failed it on a few bits, I came home had a look and the sill was almost 100% solid, went back to them to get the free retest, Bloke commented on the...

Tell your sons mate to stop following the crowd with caddys and get a mk2 golf and be done with it :P Recon as said pop the outer bit off and I bet it falls to bits, Best get some silkaflex as well.

They will fit every stick you can find, unfortulantly they normally fall off after a month unless you glue them on, you normally get several plastic cups that fit the ID of the knob and various ODs of the sticks then there is a grub screw which holds in in place.

There is loads of Type approved ones for post 98 cars, If you look at lots of modern cars they have the box mount and just need the pin for it, Just dont think they have them on the open market, Wasnt too sure how the NEW Mot and the newish EU laws were about it.

Cant stand the gauntlets but get some good leather gloves from work which are great ;) Whats the legalitys with that since the new law came it ??? And I dont mean will the MOT man pass it im thinking the VOSA Spot check!!!

If you go in and tell them your in the trade of restoring cars you can get a trade card ;) I find that if I use a 2" dog leg brush its great as it can get in loads of places and you dont get as covered.