Search results

Thanks

Thanks for the replies, how do you get access to to this metal cover, is it from the inside of the tub? is it beneath the carpet?

Hi guys Rear Fog on 300 tdi is badly corroded and needs replacing, looking at the old unit in situ, Ive seen the 2 retaining bolts at the back of the unit but im unsure how it connects into the wiring loom? all I can see is a the black wiring sleeve all the way up to floor Are there connectors...

Hi guys Cant seem to find a definitive answer Ive got a 1996 300tdi, on the swivel pin housing it has a the drain plug as opposed to later models that just have a filler. Should I be using EP 80/90? or one shot grease?

Hi Investigating the tapping noise I took out the rock shaft to discover it was broken in 2 places, I just received a new one and am trying to assemble it I know there are LH and RH rockers but one each one ive noticed a number like b1 b4 b11 b7 b12, does they have any significance? all the LH...

Hi guys, im in a bit of mess Im only a very novice mechanic so bare with me. The thread for the rear of 3 large rocker shaft studs has stripped, I was tightening the rocker cover back on and it came loose. When I removed the stud I noticed a previous owner or garage has helicoiled the thread...

Steering box adjusted and it feels more solid now in a straight line. Thanks everyone.

Just to update I ordered a breaker bar and a 6 point socket and it did it with ease. The WD40 soaking in probably helped aswell.

Its a bit oily but it hasnt been painted over, its the 19mm locking nut that just wont budge. I want to take out a bit of play in the steering, ive done a search and cant seem to find anyone else with this problem. Ill just have to keep soaking it in wd40.

Hi Ive been servicing my 300tdi today and I wanted to adjust the steering box but damm that locknut is on tight. I tried with a spanner = no chance so then tried and got socket set and ratchet and still it would not move! Any ideas? ive sprayed it with wd40 and could keep doing that for...

Hi Ive been trying to remove one of the windscreen spindles because the thread has gone and the wiper arm slips and has even fallen off :D but the grub screw is rusty and wont budge? any ideas how I can change it??

Hi Not really concerned about looks to be honest. I want a tyre that is good on the rode in the summer but also very reliable in the winter snow.

Thanks Are AT's ok in the snow?

Hi guys I know you get looks of tyres questions but please bare with me! I had decided to put on Grabber AT2's but the guy at the garage said he had heard very good things about the newer Grabber AT tyres so I wondered if anyone had tried these or know which is the best to go for? Thanks

Looks great, I take it that isnt a roller job, what type of paint did you use?

Hi Have a search on here mate, theres quite alot of advice about buying a defender. For 4-5K you should be able to get a decent enough 300tdi 90 (1994-1998) Best advise would be to take someone along who knows about defenders, rust the main issue.

as above theres on online workshop manual here Landrover Downloads | Repair My Landrover

Im really enjoying this thread! What did you use to clean up the radius arms, thinking about having a go myself.

Is there anyway of fitting standard rubber bushes without a press?

Oh its a newish one, a puma hardtop