Search results

Hi, separate bulbs, H7 Main, H11 dip with the lens type lamp. It now looks like I may have resolved this. I re-seated the H7 main beam bulbs, they looked ok to begin with but after taking them out and putting them back in again the main beam is much better. They both must have been not...

Hi, separate bulbs, H7 Main, H11 dip with the lens type lamp. It now looks like I may have resolved this. I re-seated the H7 main beam bulbs, they looked ok to begin with but after taking them out and putting them back in again the main beam is much better. They both must have been not...

This is my head light type. I can not get a decent main beam. It has the correct bulbs in, I have put higher power halogen bulbs in and yet I can not see much past the dipped beam distance, the light come out in a scatter pattern rather than a beam. The lights are adjusted correctly. Any help...

Hehe, me too, I have a plastic cup for bailing it out and was about to do as some have on here knock a hole it the bottom to let it out which then puts it in the same category as my Series, it lets water in but lets it out as quick !

Hi, has anyone seen, made or used a radiator muff on their Freelander ? I have always blanked off the radiators on my Landys over winter which has made quite a difference to the rate the heater warmed up and was thinking of doing the same to my 2004 td4 so as not to be burning so much diesel on...

Aye, but there is a case of wet locker going around which is without any of the boot floor carpet being wet, just the locker ie the under slung box where the jack is kept, being wet. It has been a mystery even for Land Rover who changed my door seal initially under warranty and ended up telling...

Thanks pvince71, When I had my back silencer box off to replace it I put loads of underseal around that seam and plastic screw plugs for the hinges on the locker lid and have had no more water in the locker, been through loads of water since and by now it would be at least an inch deep. I...

Sounds like he was using your freelander as a box of spares, if you paid "spares or repair" price then fine but if not get a refund and buy a decent one.

Put on new wiper arm and its fine, loads of clearance, could not see any difference between new one and the old when off, how strange! £8 from Paddock which I thought was cheap so ordered some Britpart slotted and drilled vented discs with mintex pads, now the hill descent works without...

Thanks all for your replies, does not look broken but will take it off and have a look, rekon wheel carrier will have to come off first by the looks of it. Cheers Paul

Hi, has anyone had a problem with the Rear Wiper bade scratching paint on the back door? Noticed today when I had the spare off my TD4 sport that the wiper arm when fully to the right catches on the door and has scrapped off 3 x 2 inches of paint :( Every thing looks ok so can not way up...

Fitted my EGR bypass today and cleaned out the inlet manifold, could not believe how much crud was in it for a 50k miles engine, breather filter has been regularly changed. Perfectly clean upto the EGR then once the exhausts gas are introduced every thing is choked up with a carbon and oil crap...

Just resurrecting my request as it would be really useful if someone could do this for me. Ta :)

Hi, mine had 3 thick washer spacers which I removed when fitting the bike rack fixing adapter which provides adequate spacing.

Pre 2000 steel wheels will fit post 2000 and face lift. Strange, some of us with the drug dealer 18" alloys can not wait to get them off and put on a set of steelies to get muddy in and thats just using them on the roads here in North Yorks ! Yes those look like my sport alloys which with the...

I would really appreciate if someone with a facelift td4, not Sport, could measure their ride height and travel please to help me put to bed whether or not the sport has shorter struts (dampers) than the standard. Some dealers have told me its just the springs that are shorter and others...

Have y'all seen this ? Symptoms - Bell Engineering

Just spent the afternoon under my 04 td4 because I have had a vibration at 1600 ish revs for 5 months. Jammed the throttle at the required revs with td4 on ramps and crawled underneath to have a look. Found I had a badly fitted engine tray which made a rattle in sympathy with the vibration but...

How odd, ya can fasten the shelf down but not hold it up ! Ive got a bald spot now from using my head to keep the lid up and allow both hands free LOL I wonder if they stop the thing bouncing up and down if the tops off and the rear windows open ?

Well spotted ! my shelf has 2 straps to hold it up when in the boot but no where to fasten them to, any Ideas please? I guess some sort of hooks on the roof of the hard top? cheers