Search results

Success ish!!! Changed the o2 sensor on bank1 and she's running so muchbetter, still slightly hesitant so I may change the other. Thanks for all your help folks

Thanks for your replies guys, I'm not sure what the ecu make is, I looked under the bonnet where I thought it should be and found a zavoli ecu for the LPG system. Very confused now!!!!!!

Thanks for that mate very helpfull, i'm gonna order 2x o2 sensors and see where that get me.. fingers crossed. Regards Dan

Thanks for that mate very helpfull, i'm gonna order 2x o2 sensors and see where that get me.. fingers crossed. Regards Dan

i had mine played with by Graham at Celtic tuning and he made it a different vehicle, he's even better with diesels though!! check them out at Celtic Tuning - Performance Remap Specialists

Hi Guys na Gals, Anyone have a clue what these fault codes might mean? p0172, p1319, p1172. My 4.0 rangie is running like a bag of spanners and i cant figure it out, i think p0172 may mean fuel trim rich on bank 1 but i have no idea what that means or what bank 1 is, i'm starting to feel...

Hi Guys na Gals, Anyone have a clue what these fault codes might mean? p0172, p1319, p1172. My 4.0 rangie is running like a bag of spanners and i cant figure it out, i think p0172 may mean fuel trim rich on bank 1 but i have no idea what that means or what bank 1 is, i'm starting to feel...

Hi Guys, Does anyone know of a reasonably cheap engine fault code reader for a 2000 (x) rangie v8 4.0? it running like a complete bag of spanners at the moment so i fancy reading the fault codes to have a go myself! i've been told that the engine is a different fault code reader to the rest...

Hi Dan, I had a similar problem with my 4.0 v8, it seemed to just not start one morning, when the nice AA man came out (lazy i know but it was ****ing down with rain) he disconnected the fuel pump, (by pulling the fuse probably) turned it over for a while then when it was all connected it...

Hiya, The Stat is a pretty easy job to change, did mine yesterday, ya best bet is to pump yer suspension up and open a door so it won't go back down, that way you'll have plenty of room underneath, it's located at the bottom right of the rad facing back towards the cab, a bit fiddly but not to...

Hi Chaps, Thanks for yer help, i've filled the beast back up with water and started her up, the expansion tank bubbled and settled down, came up to temp on the guage and steadied out, got hot air in the cab but the return pipe from the top of the rad to the expansion tank is kicking out steam...

Hi All, Thanks for the previous help, i've now replaced the thermostat that i hope was causing the previous overheating problem, filled back up with watyer and antifreeze started the beast up without the expasnion bottle cap on, lots of air bubbles and now a lovely warm cab, temp guage went up...

Hi People, Can someone please tell me where the bleed screws are on the 4.0 v8 and olso the best way to bleed the system? i'm pretty sure i've got a random sticking thermostat so there is one on order, i have heard there are problems bleeding after so thought i'd seek some advice from those...

i connected the IOPlay inline with the supplied cable and it works brilliant!! it comes with a mic that i ran up the trim on the door pillar and put the controls on top of the centre console! it automatically connects to yer i phone as soon as you turn it on and mutes the music so you can talk...

Thanks for the help everyone, I've got no other symptoms apart from the -40 display and hot air. I'll check the sensor out on Monday and go from there. Many thanks. Dan

Hi everyone, can somebody help me out with the location of the ambient temp sensor on a 2000 p38? Mine is giving a permenent read out of -40 so I'm getting constant hot air blowing in the cab. Thanks in advance Dan

It plugs in line with yer stereo so ya can stream music from yer iphone, it also acts as a hands free kit that mutes yer music and the speech comes out of the car speakers. i've seen it work in another car and it's very good but i've now been told that it's not compatable with the Harman Kardon...

just got mine sorted, it turns out that the xqk 100340 amp and the xqk 100210 amp are the same, i tried it on the off chance because i was sick of no sounds and now i'm back up and running RESULT!!!

I don't s'pose anyone has installed an io play into a rangie p38 with the Harman Kardon system in it? i've just fookin got one and now i'm being told it's not compatable!! Don't wanna blow up the amp seeing as i've just forked out for a new one!! Many thanks Dan

I'm having the same problem, i've been told that if there is no sound from the stereo or the satnav then it is probably the dsp amp situated behind the sub woofer behind the panel and all the sound proofing, trying to find a replacement is a bitch! if ya have any joy fixing yours then let me...