Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. I

    Bleeding brakes - advice needed

    Hi by a new one do you mean a servo ? or a seal kit (or are these a pain to do) Cheers Ian
  2. I

    Bleeding brakes - advice needed

    Hi Jamesmartin. when the pedal is pumped you can see the fluid pumping back into the res, which also has a small amount of black deposit in the bottom thanks
  3. I

    Bleeding brakes - advice needed

    Re: poor brakes Pt 2 Hi I have now converted 200tdi calipers to fit my 3oo tdi with new flexi's/pipes and a couple of T pieces. + disc and pads (just don't ask!) I now have brakes that actually stop the vehicle rather than just slow it down. However ! I have a spongy pedal that pumps up ...
  4. I

    poor brakes

    Hi Following on from excellent advice I have now converted the 200tdi calipers supplied to fit my 3oo tdi with new flexi's/pipes and a couple of T pieces. I now have brakes that actually stop the vehicle rather than just slow it down. However ! I have a spongy pedal that pumps up ! I have...
  5. I

    buying advice please

    Hi, I am considering purchasing a Freelander, I want diesel and 5 doors and looking for around a year 2000. Any advice on what to look for, good ones and bad, known mechanical faults, rust areas etc and what sort of price range. Many thanks in advance
  6. I

    poor brakes

    Again thanks for info. The disc are solid (non-vented). Does anyone have a picture of how the mod should look as I am unsure what I sould be aiming for. Cheers Ian
  7. I

    poor brakes

    Hi Many thanks for the replies, it does indeed sound like Padocks have sent 200 tdi calipers. I realised that there was something wrong with the wide selection of nipples plus the wrong hole sizes for the 2 fitting bolts and the pad retaining pins. After double checking Paddocks website I...
  8. I

    poor brakes

    Hi I have poor brakes on my 1995 Disco (manual). they feel a bit spongy, don't have much feel to them and I have to press hard to pull up sharply. I have just fitted new disc's pads and calipers as the old one were knackered. (Incidentaly I got the lot from Paddocks and the calipers have 3...
  9. I

    Can't get my disco 1 300tdi into gear

    Hi I set off on my way home from work this evening, after travelling only a few hundred meters I realised that some thing was wrong with my clutch. The clutch pedal won't press all the way to the floor, it goes so far then goes solid, and when I try to engage a gear it wont go in and...
  10. I

    Locking wheel nut key req, but which one

    Hi I have a P reg Discovery 1 300tdi that I have lost the locking wheel nut key. I have looked closely at the nuts and all they have on them is a number 5 and not a letter. Does this mean anything to anyone ? Thanks in advance Ian
  11. I

    Water leak ? whick gasket ?

    Hi I have a 96 P reg 300tdi Discovery with a water leak. looking at the engine from the passenger side and the water runs down the side (near the front) of the engine block. There is a gasket where the leak appears to be coming from but I don't know what to order. its a couple of inches back...
  12. I

    dead 300 tdi

    Hi My mate ownes a 1997 300TDi manual thats done a genuine 80K miles. This vehicle has never missed a beat for him until today. He had just driven 1/2 a mile maily up hill and it suddenly lost power, made a few strainge noises as if it was only running on a coupe of cylinders then died ...
  13. I

    My lights switched them selves on !

    Yes they do go off, but I turn the lights off before the engine ? Ian
  14. I

    My lights switched them selves on !

    Hi guys, this weeks fault on my 1995 P38. When I stop the vehicle and turn the lights off then the engine, the lights come back on ! A warning come on the dash saying something like lights dely on, this has never happend before. If I put the key back into the ignition the lights go off...
  15. I

    EAS with too much preasure

    Hi The continuing saga regarding my 96 P38 A month ago I changed the compressor inc the exhaust valve thing ! as the old one was very tired. This week I have had the eas reset, as last weekend all the height setting lights came on for no apperent reason. The mechanic said the fault was...
  16. I

    EAS all lights on (1995 4.0 P38)

    Hi I am sure that this will have been covered several times over but..... for no reason what-so-ever travelling along at 40mph, all 4 height indicator lights started flashing then they stayed on permanetally followed by the warning symbol on the dash (the one with the picture of a Range Rover...
  17. I

    New ignition key fault

    Hi Due to my local garage snapping off the ignition key in the ignition. I have had to have a replavcement key cut. This works fine, however when I turn the engine off and remove the key the dash display a mesasage stating 'ignition key in' and the remote won't lock the car. If I use the key...
  18. I

    P38 suspension won't pump up sometimes

    Hi Re :- 95 4.0 P38. Normally first thing in the morning when I start the car the suspension compressor kicks in, the lift light on the dash flashes for a few seconds and I feel the car raise slightly. However for no apparent reason twice in the past two weeks the light has remaind flashing...
  19. I

    Ave fuel consumption whilst cruising

    Hi guys I am off to France on Saturday for the summer and I have opted for the comfort and space of my 4.0 auto P38 rather then my Celica, which would obviously be far better in fuel. My question is, since I am in no great rush I was planning on a gentle 740 mile cruise, so does any one know...
  20. I

    Throttle Position Sensor - 1995 P38 4.0

    Has anyone purchased, or knows where I can get one from, and roughly how much there are ? Cheers Ian
Back
Top