Can't get my disco 1 300tdi into gear

ihs61 · Feb 16, 2011

Hi

I set off on my way home from work this evening, after travelling only a few hundred meters I realised that some thing was wrong with my clutch.

The clutch pedal won't press all the way to the floor, it goes so far then goes solid, and when I try to engage a gear it wont go in and crunches just like I had not pressed the clutch at all.

Any suggestions

Ian

halo · Feb 16, 2011

it's possible the release arm has worn through preventing it from pivoting in either direction.

do a quick search on here lots of info

DefenderOffender · Feb 16, 2011

Definatly the clutch arm on the 300 tdis they use a cheap tin arm its very common for them to wear through

alex8882 · Feb 16, 2011

have you had a juddering at all?. It does sound like the slave has punched through the clutch release fork. However my disco did the same as yours and turned out the friction plate of the clutch had pulled itself apart

Can't get my disco 1 300tdi into gear

ihs61

Member

halo

Active Member

DefenderOffender

New Member

alex8882

Well-Known Member

Similar threads