Search results

Hi All, Can any one on here recommend a good independent specialist in the Coventry north Warwickshire area that is good with P38's TIA

Hi All, Could somebody help me by measuring a couple of dimensions on Hi Cap Tubs please. The dimensions I am looking for are the measurement from the exterior front of the tub back to the centre of the wheel hub for 1) single cab 110 2) single cab 130 3) Double cab 110 4) Double cab 130 ad...

Hi All, my L322 outside temp sensor wiring got rubbed through by the air con fan - I cut out the knackered bit and soldered the ends together - problem is it recons the temp is -37 degrees C when its actually about +7. does anyone know how I can get it back to reading some thing near reality...

Hi All - just changing the front air spring (2009) Vogue TDV8 cos it has a hole in it, strut is off - checked the video etc.. and the top of mine is not the same - in the video 2 small retaining bolts hold the heavy cover on to the top of the strut - on mine the cover /washer has a 14mm hex head...

Hello All - bit of a ramble this but - 2009 L322 TDV8 - my lcd screen occasionally will simply show just multi coloured wavy lines. I suspect that it has something to do with the Sat Nav unit because when this happens I cant get the unit in the rear to eject the disk - so I have looked to...

Hi All, Just a quick Question for anyone with a facelift F1. on the speedo there are 2 black push buttons, the right hand one resets the trip etc.. but my left one doesn't seem to do anything at all. Can any one shed some light on what its there for please? Cheers

Hello All, Hoping for an answer to this one please, Has anyone on here had a TD4 Freelander that's been speed limited. If so how was it done, or if you bought one that was limited and have had it taken off, how was that done too. The reason I ask is due to having to have a Black Box fitted so...

Hello All, As my youngest child is now approaching driving age, it looks like I will be adding to the defender, driven by my son, and P38 RR driven by the wife, with a freelander 1 to be driven by my daughter, having little experience of freelanders I am looking for opinions as to reliability...

Hi Gents, The door latchmechanism on our early 90 is worn so that you can't quite open it from the inside the part number is MUC6979 but it's no longer available as it is a lift up handle version with an inside door pull handle too. any ideas on where to find one (already tried Ebay and the...

Hi Gents, we have put a 300 tdi in a 2.5 n/a and have fitted an electric fan the kit puts a switch in the top hose, but I was wondering if any one on here has replaced the egr temp sensor in the head for a switch to control an electric fan? if so where did you get the switch from, and at what...

Hi Gents, I have looked at the thread on upgrading the EAS pump but having just had the recon pump I bough 2 1/2 years and less than 8k miles ago have the seal go (its the third pump in 8 years) I would like to know has anyone found a reasonably priced alternative compressor that works or has...

Hi gents, hoping someone will know the problem with my hevac. basically it has decided that all the lights and display should just flash on and off in steadu time - nothing worksblowers, demist programme, changeing the direction of air, all that happens is what everyou select the light of it...

Hi Gents, Need to chenge the rear Outrigger as its gone on the inside edge of the Chassis, does any one know where I can get a full length outrigger that will go right through from outside to the inside edge. All the replacements I have found are for the outside of the chassis only. If I can't...

Hi Gents, Does any one know where I can hire a DTi Gauge and Pump Fitting mount to time up my 2.5 BMW FIP, near to West Devon. I would buy them but as this is something that needs doing once in a blue moon - it they will sit in the tool box gathering dust from then on Cheers

Hi Gents, does anyone know if an LT77 from a V8 Disco will fit a 300TDi Defender lump or what needs to be done to it to make it fit - as its a swap for an existing LT77 I would hope that any bits needing swapping could come off the old one Cheers

Typical, Fitted a shiney new front hub today, followed the set up for the ABS sensor to the letter - namely lubricate it with silicone grease, fit it against the hub and let it set its own gap when you drive it, and guess what - ABS fault appeared on the dash, and the light will not go out. The...

Hi Gents Has any one changed the front hub bearings on their P38? If so did you buy the whole hub or just the bearing? What did they cost etc.. All comments appreciated Cheers

Hello Gents, can anyone recommend a low cost good quality flexible exhaust seller please - I need about 2 foot of 57mm ID for a project exhaust

Hello Gents, standard tyre size for my 16" rim is 255 65 16. has anyone fitted a cheaper to get, not too chunky, but not road pattern alternative as the standards only fit P38's discos and fronteras, I thought a 265 70 16 might be good - anyone tried them? cheers

Hello Gents, can anyone give me a clue on whats up with this. She has a very slight leak on the front bag - takes 2 days to drop from standard to access height, but here's the problem. The system will not tell the pump to run. when connected to the unlock software there are no faults listed I...