Search results

Hi do I need to prime the oil pump on 1.8? replaced with a brand new one. I see a screw there on pressure release I believe, can I take that off and squirt some fresh oil there? Finishing a full engine rebuild, I am going to crank it with fuel pump disconnected and no plugs to lube it up but I...

Hi I would like to have new bearings on my liner lift as they are flush with the block. Would like to regain that 4 thou... if possible with the shims. So since I am taking pistons out, would like to have a nice set of piston bearings in case mine are worn out. Now the question is... which...

Hello I have a question... got a K series freelander that it's weird on compression and idle after head gasket job. I did see the cams were a bit tatty, the question is how can I tell which is inlet and outlet? the part numbers are different in microcat but as far as I remember casing marks...

duplicate sorry forum tech

Hi this is unseen by me. If I set the headlight to level 1 they go up and down in a very funny way. If I set it to 1... they are stable. Is it the switch or is there any calibration for the motors? 2002 1.8

Hello I have a good offer on some 16" commercial tyres new. They look the business, and prob outlast the car. Now, they are definitely heavier so my question is this weight affect alot or just a bit? I have no experience with them. A normal tyre is like 8-9kg commercial is about 12 I believe...

Hi so I am back with yet another 1.8 summer project underdog. Oil in coolant on this one, plenty of it. Got brand new cylinder head with valves and tappets, bw750 gasket (lucky find) and all the bits including coolant reservoir and PRT thermostat with hoses. What is the best way to flush the...

Hi got a question. Anyone having a HSE with the harman kardon/becker unit? On night/illuminated, are the surround buttons properly illuminated or just dimm with the main display being brighter? Does turning lights on make any difference? I just retrofitted a becker unit and my car did not have...

Hi, I am retrofitting the becker unit to a fl1 facelift, for no other reason than the looks and I have bluetooth unit behind which works fine. Now, I cannot get the steering wheel controls to work. Not volume, not next/previous. I think I need to plug a wire somewhere but looking at the...

Hello, did anyone timed the camshaft chain on 2.2 fl2 and remembers what is the actual mark? There are two marks, dots and arrows. Workshop manual says align on dots which is not possible cause the dots are between the cam teeth so the link will not land properly. But then, purchased toppix 1h...

So, new day new issue. Now I have a coolant leak that is not visible anywhere. No oil in coolant, no pink traces, no white smoke. Just going to minimum after approx 1k miles. I suspect is the EGR however that is very expensive. My question is it usually the valve or the cooler that leaks? The...

Alright, after temp "fixing" haldex with fuse out I now realised that there is a fuel level issue. Just filled it up, shows a quarter and that is about it. Is this a tank out issue to fix? cause is now filled :)

Greetings, I am back on landyzone. After whoring around with mitsubishi, ford etc I am now back to Freelanders although 2 which is considered relible. Got a cheap enough FL2, took a gamble and seems like I've lost. The whole car shakes and shudders when I turn. Similar to FL1 when the diff/prop...

Selling my own Freelander. 5dr 1.8 Petrol, low mileage. Price is 1200 95 thousand miles. Full V5 on my name. MOT until 5 February 2021 2x Keys (central locking and windows work on all doors) Recent service done (oil, filters, timing belt, water pump, hidraulic lifters) Upgraded inlet manifold...

Hello, going to install an amplifier for the subwoofer. What is the best recommended way to power it up? The quick turn for me not being a car electrician or knowing much in that area is just the cigarette plug but I have already the dashcam and a dual usb there, not sure if I can put an...

Hi, quick question how do I replace this engine mount? do I need special tools or by the look of it just a screw under the wing accessing by taking the wheel arch off?

Delphi 2015 R3 OBD Tester with Dell Duo Laptop (can turn the screen and make it a tablet) Comes installed, programmed and configured with the OBD Bluetooth CDP+ reader. Laptop is like new with brand new battery. Configured via Bluetooth, can work with usb cable as well. Can read !!! ALL ...

Sorry moved this to accessories

Hello, I am just window shopping for the moment. I do have a ramp free on my mate's garage, and might have to change the ird. I am considering for no reason at all to upgrade the engine to tf's 135 (non vvc) as the engine is cheap enough also I can sell mine which is in very good condition. I...

Hello, so I have a puzzle to solve here. On microcat, says after 1a VIN engine mount pn is KKH102720 which is However, this part is quite expensive. The cheaper one (less half the price) is KKH102260 The cheaper one appears to be shorter however I do believe both will fit. Both bushes on...