Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Palagius

    Needing help with wiring the 58 SII

    Hi, get as many pics as whats already on there posted, a few of the fusebox, switches, cable runs etc, I am sure that if you take it step by step and post pics from the very start and post more as you go along the forum advice will be good and the wiring will start to make sense,
  2. Palagius

    Half shaft nut retaining clips

    If stuck you can always find something to do the same job as a splitpin
  3. Palagius

    Ace cafe land rover meet this saturday

    As above 11am
  4. Palagius

    Elite Range Rover Clydebank South Douglas St, Scotland just conned me !

    Perhaps it would be better for you to drive and have somebody who knows their onions as a passenger to listen, my indie mot garage mechanic has done this for me, fwiw a mechanic, even on trade plates cannot drive an unroadworthy vehicle on the road, most insurances dont allow for testing on a...
  5. Palagius

    V5C fuel type / Heavy oil / historic vehicle

    I seem to recall that if any major change to a historic vehicle is something that was fairly common at the time they were being built and any change was done within 10 years of its first registration then its fine,
  6. Palagius

    Series Landy Values

    what spec are you looking for?, On the road and Drivable land rovers can be found advertised for between 3k and 30k these days for the same model, some sell quick and others hang about for months, some folk want a rough project to spend their leisure time on whilst others want a restored one...
  7. Palagius

    Jones

    How many times have you replaced the fuses and what rating are they, a multimeter is a must if you are going to get into the wiring, Could you put some pics up of the wiring and fuses, I'm sure that you will get good info from here, land rover wiring is fairly simple and easier to get to then...
  8. Palagius

    Anti seize/copper grease and nylocs

    A bit off topic, I seem to recall that Greeves motorcycles, makers of my old Scottish were the first company to use nylocks instead of spring washers in a vehicle application
  9. Palagius

    Anti seize/copper grease and nylocs

    Tbh I'd be interested to find out how, in the general scale of things just how abrasive copper slip is, sounds like it would it be ideal for using when honing a cylinder,
  10. Palagius

    Parts suppliers are shocking

    Many are let down by sending via the cheapest delivery services, on a hundred quid + order sending by evri or similar is just not on, if the option was to pay a bit more for a reputable delivery company then some of the above may sell more parts,
  11. Palagius

    Woke or just a eco idiot

    It will be next to impossible to build and sell private cars, commercial and delivery vehicles that cannot go into 'zoned' areas such as most towns and cities will be within 10 years, If driverless delivery vehicles and buses do start appearing in the near future then it will be the pretty much...
  12. Palagius

    Woke or just a eco idiot

    Thats one of the drawbacks, Its not the rural folk that are formulating policy in this country, I'm not sure whether the p.m actually owns a car or can even drive one, a youngster just out of education with a driving license down here has a better chance of finding a regular, good job than...
  13. Palagius

    Woke or just a eco idiot

    Lots on the news about batteries and fires, 1500 cars went up in smoke at luton airport and i wouldnt be surprised it was an E.V that caused the conflagration
  14. Palagius

    Woke or just a eco idiot

    Many of the urban younger generation tend to use uber etc rather than go through the hoops and expense of owning a private car these days, Combined with home working half the week, online shopping and timed home deliveries and the fact that many are busting their asses saving for a house or...
  15. Palagius

    Woke or just a eco idiot

    I had an online search to find out what 'rare earth' metals, oxides and lanthanides actually are and what their uses are, they do seem to be integral to modern, ie post ad1800 industrial processes, Related is that down here the gov is going full steam after lithium and other non rare earth...
  16. Palagius

    Painting a galvanised chassis

    On my aged but sound galv chassis I used in several coats a whole can of rustoleum special metals primer for galvanised and non ferrous metals, it did seem a bit chalky, i dont expect to use that brand again, some research came up with phosperic acid which i regularly use as rust killer/...
  17. Palagius

    Welder advice.

    I bought a cheap welder for practicing on tiny jobs and also not to have to rely on somebody elses timescale for keeping my project moving along, after a bit of practice I welded new pillars,bulkhead sections and foot panels in with a lidl gasless mig bought for under a £100 and it coped well...
  18. Palagius

    Classic cranckshaft pulley stuck after bolt removal

    Take some pics as you go along for us
  19. Palagius

    Series 3 Questions

    How much oil are you having to top it up with?, Atb and good luck.
Back
Top