Hey guys. Ive recently notices a loud grinding noise coming from the front offside wheelarch when a turn left. Straight away i thought hubs or cv joins. So ive changed both front hubs and cv joints and the problem persists. What could it be?
Ive just done an oil and filter change on my td5 manual to find a plug near below the oil filter which has 2 thin wires coming from it going to the rear of the engine, one white and one black. But the black one has ripped off. what are these wires for.
Just took out my rad and intercooler to find my intercooler is leaking and is crumbling to bits. So i need a new one. Im not looking at spending too much as ive just got a new clutch and flywheel has anyone got a link to a recommended intercooler that they have experience with. Thanks.
I have a slight problem which i will be taking a look at tomorrow. Everytime i turn right at speed a loud single knock occurs at what seems the front offside wheel. Are there any common issues that cause this?
Hi guys. I have a disco with a bit of a problem. When im offroad in low box, in a low gear such as gear 2, when i hit an incline it will cut out as if it doesnt have the guts, i have been with other 200tdis that will tick over these obstacles with no revs, if i dont apply revs i will cut out...
Hi guys. I have a bit of a problem. When im offroad in low box, in a low gear such as gear 2, when i hit an incline it will cut out as if it doesnt have the guts, i have been with other 200tdis that will tick over these obstacles with no revs, if i dont apply revs i will cut out. Its the same if...
Hi guys, quick question. I have just cut my original bumper to the line just above the fog lights. What steering guard can i fit and can i fit one that requires an aftermarket bumper now that i have cut the original. Also can the bar at the from be removed (part no.ABY100000)
Hi there, my offside rear abs cable keeps popping out on articulation, this is due to the 2inch lift. Does anyone know of how i can extend them. The american ones are 90 pounds before shipping so i would prefer to avoid that option.
Ok, when im in low box the throttle is exremely responsive to the point of when i go over a speed bump it will jerk me forward. When im in high box it takes a lot of throttle to rev. So ive plugged my nanocom in and it says in in low when im actually in high and high when im in low. I believe...
Ok when ever I articulate the rear axle to an extreme when offroad, the side that is compressed won't reinflate and the airbag sits on its arse. What causes this. I get the yellow dash light aswell.
Ok ive lifted the disco td5 2 inch and its great. Ive just started to hear a click nr the front at over 20mph. It isnt effected by braking and still clicks in neutral as long as its over 20mph, any slower and the clicking/ticking noise goes. Anyone had this before?
Hey, ive recently fitted my ome 40mm lift on my disco 2 and its great. Im going to buy 265 75 16 stts. Ive heard you need to cut the plastic front bumper. Has anyone got any pics of anyone who has done it so i know where to cut and what it looks like. Thanks, rob
I changed my oil pump bolt last night and in the process had to butcher my crossmember to get the sump out. all but 2 bolts snapped and i ended up grinding the tube off. Question is, do i need it on the vehicle (ill be offroading) and what is my best option for refabing one as i am getting a...
hooked up my disco td5 to a mates snap on diagnostics. i got the following:
air flow circuit fault 6
air flw circuit fault 20
exhaust gas recirculation (egr) valve stuck open 91
what do these mean, i also have my egr blanked.
cheers
ok i'm lifting my disco 2 by 2 inch for more clearance and 265 75 16 tyres, i have rear bags which i'm getting 2 inch spacers for. i've read that old man emu shock and springs are the only way to go, so what duty front springs and shocks do i need if i'm keeping a stock body with no aftermarket...
Ok i have a td5 es that has a coil conversion on the back. What do i need exactly to get airbags again and do i need ace. I would like to lift the front on coils and put the rear on bags with 2 " spacers. Do i need ace? And what else do i need for the full assembly
Hi ive got a td5 disco, im looking for a diagnostic kit. Which is the best to use, hawkeye or nanocom evo. What are the pros n cons and why are they better than each other. Also can the hawkeye live read. Cheers