Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    Rotary oil filter

    What is the problem with the pattern rotary filter
  2. C

    Disco 2 Radiator muff

    I remember being in norway about 25 years ago and most cars were fitted with an electric heater in the water system. this meant the cars warmed up very quickly, saved the owners alot on fuel and helped with emitsions. There were plug in stations in car parks so the car would never be cold.
  3. C

    Disco 2 EGR removal query

    Thanks for the reply, not wishing to hijack the ops thread. Yes i just fitted the blanking plate and left everything else inplace. is there a diagram explaining the bypasses and blanking proceedures. Many thanks, Colin.
  4. C

    Disco 2 EGR removal query

    When i blanked my sons car i simply installed the blanking plate only. Does this mean ive only half done the process, is there any real benefit of blanking the vacuum pipes.
  5. C

    Is my rear chassis okay to tow a caravan ?

    I was going to say it doesnt look good, when the welds look like squirel $hit and covered with a thick coat of underseal you and i know its been done to get it through an MOT. Just because its passed an MOT test doesnt mean its structrally solid, it simply means that the tester with his MOT...
  6. C

    Disco 2 Knackered key fob

    Ive repaired the fob, but he still has to source a spare key fob and have it programmed.
  7. C

    Disco 2 Knackered key fob

    When my son bought his 02 td5 Disco it only came with one key fob. Today the unlock micro switch departed the circuit board. Following a conversation with a landrover dealer for prices for 2 new key fobs and programming he is faced with a bill for just under £400. Is it possible to disable the...
  8. C

    Disco 2 Knackered key fob

    When my son bought his 02 td5 Disco it only came with one key fob. Today the unlock micro switch departed the circuit board. Following a conversation with a landrover dealer for prices for 2 new key fobs and programming he is faced with a bill for just under £400. Is it possible to disable the...
  9. C

    Big Stripdown and Weld thread 300tdi

    Have you tryed making your repair plates 5 to 10 mm bigger all round, by doing this is will make welding so much easier. when you butt weld 2 pieces together you can only weld a short distance before the heat builds up and you burn through. By making the repait plate larger you can now weld on...
  10. C

    spot welds

    The Best way from experiance is to use a spot weld bit. if you can wedge something in between or get parting pressure to seperate the two parts this helps as soon as you drill through the surface you wil feel the surface release. possibly the worst way to remove spot welds is by hammer and...
  11. C

    Big Stripdown and Weld thread 300tdi

    You need to fine tune your welder. If the welds are proud Its because you have the wire speed to high.
  12. C

    The dreaded three amigos

    what guage or amp wire is recomended for the wiring mod. Thanks.
  13. C

    Broken Drivers seat

    ebay
  14. C

    MOT time

    someones tired:rolleyes:
  15. C

    D1 oil and filter change

    Never heard of anything like that, follow normal practices re pre filling the filter.
  16. C

    Plug ident

    Are yes that makes sense, Thanks.
  17. C

    Plug ident

    Does anyone know what the 2 plugs are for each side of the front firewall below the leaf fillter.
  18. C

    Discovery 2 td5 towing issue

    As above tyre pressures on both.The tyre pressures for the trailer can be as high as 116 psi depending on the tyres fitted.
  19. C

    welders south wales

    Was it previously used for launcing the life boat :eek:
  20. C

    Bike Carrier

    Thats a hell of alot of weight hanging on those hinges with 4 bikes when you open the rear door.:eek:
Back
Top