P38A Died and will not start

dubbleRR · May 16, 2021

If you can start it and gently GENTLY wiggle cps ,or even number 4 injector wiring and the back of the fuel pump ,cause when you were playing with glow plugs you might have moved something to make all the planets line up

and everything worked ..... in wiggling the wires it might cut out ,that could be your problem

Grrrrrr · May 16, 2021

dubbleRR said:
If you can start it and gently GENTLY wiggle cps ,or even number 4 injector wiring and the back of the fuel pump ,cause when you were playing with glow plugs you might have moved something to make all the planets line up and everything worked ..... in wiggling the wires it might cut out ,that could be your problem

My bet would be something around that glow control thingy as that's what it was last time.

Radar1946 · Jul 10, 2021

Hi All, I think I have left it long enough to not push my luck and say it is fixed. Thank everyone for your help it seems all well at the moment ( I'm not sure I should have said that, still I have said it now ).
You all stay safe as I am looking forward to a get together.

Rubberknees · Jul 10, 2021

Radar1946 said:
Hi All, I think I have left it long enough to not push my luck and say it is fixed. Thank everyone for your help it seems all well at the moment ( I'm not sure I should have said that, still I have said it now ).
You all stay safe as I am looking forward to a get together.

And now we move on to the next thing

RangeRoller dt · Jul 10, 2021

What do we think it was eventually?

CPS or glow control?

Radar1946 · Jul 11, 2021

I think it was the connectors and plug going to the injectors and injector pump / sensors etc. Since I cleaned and tightend them up all seems ok. Cheers.

P38A Died and will not start

dubbleRR

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

Radar1946

Active Member

Rubberknees

Well-Known Member

RangeRoller dt

Well-Sprung Member

Radar1946

Active Member

Similar threads