Bankz's 110 Double Cab
- Thread starter bankz5152
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
Handy ay!!!
520mm long
15kg /150n
520mm long
15kg /150n
Very handy! And just cool
Ok thanks for the specs, I'll have to try and make it fit a RRC.....
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
Saw this on the way home!
Shimsteriom
Master Procrastinator
- Posts
- 41,906
- Location
- Over Here
What could it be?
It's certainly not a Defender.
It's certainly not a Defender.
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
Having been in it, seen it on road and 1st hand accounts off road.
It certainly is. Completed tracks, with ease, at LR that standard Classic Defs struggled with...
It certainly is. Completed tracks, with ease, at LR that standard Classic Defs struggled with...
KISSMYAURA
Well-Known Member
- Posts
- 2,619
- Location
- KENT
Returns as registered vehicle : LAND ROVER DEFENDER X MHEV AUTO
I notice it says prototype vehicle under the high level brake light...
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
Exciting times.
Just got this.
Just got this.
doriz
Well-Known Member
- Posts
- 16,782
Looks proper nice that
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
yeah but is it repairable by a bush mechanic :/
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
Tis very nice!
They said the the about the TD5!
Though I do tend to agree but we wont know until someone does.
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
they did but LR were still making ROW 300tdis until december 2007 lol
Besides the TD5 has WAAAAYYYY less ECUs
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
86 less i think hahaha
Tbf that statement is overplayed. Afaik theres still only one that runs the engine etc... the rest are for fancy seats/windows/dash etc...
Push comes to shove doesnt matter if the leccy windows, adjustable seats or climate controls a bit skittish.
Plus im sure Nanocom or similar will have a unit out soon enough to tackle them pesky bugs!
Id happily take one to Spain trans Pyrenees and trust it more than my 110. That said if my 110 does break en route most the time I can fix it with what I have bar some minor bits I doubt I could fix the new one. Then again new one shouldnt break
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
86 less i think hahaha
Tbf that statement is overplayed. Afaik theres still only one that runs the engine etc... the rest are for fancy seats/windows/dash etc...
Push comes to shove doesnt matter if the leccy windows, adjustable seats or climate controls a bit skittish.
Plus im sure Nanocom or similar will have a unit out soon enough to tackle them pesky bugs!
Id happily take one to Spain trans Pyrenees and trust it more than my 110. That said if my 110 does break en route most the time I can fix it with what I have bar some minor bits I doubt I could fix the new one. Then again new one shouldnt break
I like it, but ref the leccy bits, there is the odd L322 owner that has had an issue if the steering wheel trying to crush their legs...could be a PIT ... thighs....LOL.
I hope they have worked around these issues, as always it is water ingress that causes the issues over time.
Looking at the manifold , those pesky frenchies could have polished the inside for you. Whats the benefit over a std dewebbed manifold?
Cheers
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
Yeah it happens. Guy local to me was locked inside his Velar for 3 hours
Wont warp again (my dewebbed has), equal length, larger and matched to the head. Idea being lower EGTs, better flow and faster spool.
Ill give it a minor tidy up but overall please with the qual. Will compliment the new VNT very well
Wont warp again (my dewebbed has), equal length, larger and matched to the head. Idea being lower EGTs, better flow and faster spool.
Ill give it a minor tidy up but overall please with the qual. Will compliment the new VNT very well
Last edited:
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
Joy got play in two wheel bearings
Could be the source of my ABS issue...
Could be the source of my ABS issue...
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
In other exciting news...
I am now a Tuning Agent for Empie Tuning!
I am now a Tuning Agent for Empie Tuning!
Last edited:
bankz5152
Well-Known Member
- Posts
- 9,146
- Location
- South London/North Kent
Busy day!
Two new Timken wheel bearings. Front one was trashed! Needed new pads as well
Fitted some HD Drive Flanges as well. Where a steal at £50 for four off Bearmach!
Colour match or leave as is?
All the bits for my 3" down pipe are here. Matches up well
Got to cut the downpipe to mid box flange off the old cat pipe. Couldnt find a new one! Obvs just a mock up!
Rewelded the broken weld on my door. Now shuts flush again not very pretty so no pics.
Also found out today that i had never taken the protective plastic off my welding mask
Been welding in the dark for the past year. Now I can see my welds will surely improve
Two new Timken wheel bearings. Front one was trashed! Needed new pads as well
Fitted some HD Drive Flanges as well. Where a steal at £50 for four off Bearmach!
Colour match or leave as is?
All the bits for my 3" down pipe are here. Matches up well
Got to cut the downpipe to mid box flange off the old cat pipe. Couldnt find a new one! Obvs just a mock up!
Rewelded the broken weld on my door. Now shuts flush again
not very pretty so no pics.Also found out today that i had never taken the protective plastic off my welding mask
Been welding in the dark for the past year. Now I can see my welds will surely improve
Last edited:
KISSMYAURA
Well-Known Member
- Posts
- 2,619
- Location
- KENT
Two new Timken wheel bearings. Front one was trashed! Needed new pads as well
Is there any other make? lol!
Fitted some HD Drive Flanges as well. Where a steal at £50 for four off Bearmach!
Etch n paint ASAP!
BearPANTS coating is basically they waved them near someone who was doing some electroplating!
They corrode in 6 months ask me how i know!
Loving yer pipes old boy!
Is there any other make? lol!
Fitted some HD Drive Flanges as well. Where a steal at £50 for four off Bearmach!
Etch n paint ASAP!
BearPANTS coating is basically they waved them near someone who was doing some electroplating!
They corrode in 6 months ask me how i know!
Loving yer pipes old boy!
