What did you do with your Range Rover today

Fixed the cruise control for the last time i hope !
Replaced the constantly cracking old vacuum hose,with nice new hose.

Andyp38 said:

Replaced the constantly cracking old vacuum hose,with nice new hose.

Click to expand...

What size hose did you use? I need to do mine, but I'm not sure what to buy.

Andyp38 said:

Fixed the cruise control for the last time i hope !
Replaced the constantly cracking old vacuum hose,with nice new hose.

Click to expand...

Recently did mine with shiny blue silicone hose, it's the blingest thing on the car!

Stufer said:

Recently did mine with shiny blue silicone hose, it's the blingest thing on the car!

Click to expand...

as long as it's not 20" or 22"s your ok with that mod

MrGorsky said:

What size hose did you use? I need to do mine, but I'm not sure what to buy.

Click to expand...

6mm inside diameter, I ordered 3 meters but had a fair bit left over, eBay

MrGorsky said:

What size hose did you use? I need to do mine, but I'm not sure what to buy.

Click to expand...

Like Stufer said 6mm hose id.
Mine was from a turbo boost gauge kit i'd had.

Cheers all.

Rubbed the green gunk off that has been accumulating on the roof. Window seals need doing too. Need a cover for it, never gonna get it in the garage, too much junk.

Fitted new torque converter started at 7 this morning just finished :crazy:

fixed radio with new aeriel
everyday a little job ticked off the list

Picked top hatted block up and rebuilt short engine

jipph1 said:

Picked top hatted block up and rebuilt short engine

Click to expand...

:welcome2:

Does anyone know how to remove the headlight wiper blades on a 1999 range rover?

Thanks

JAKrangerover said:

Does anyone know how to remove the headlight wiper blades on a 1999 range rover?

Thanks

Click to expand...

Lift the cap, undo nut, wobble to get off the arm. Then pull blade out of the arm. Refit is the reverse.

Changed transmission oil and filter - can now go up hills !

Changed coolant. Very confused as to what replace it with, in the end I went with Glysantin G48 (blue).
Also topped up the gearbox. it took nearly 250ml. Is that excessive? I'll do a complete oil and filter change in the next couple of weeks.

Put the 16" wheels on my P38 so I can get my new tyres fitted to the 18"'s. I'm surprised how knobbly the ride is on the 16"'s, directional stability is good though.

Nothing, just looked at it, sitting at the correct height after standing since yesterday. Very satisfying after I rebuilt the valve block.

polished wood cappings on all four doors with bees wax
measured up for cb radio to fit
touched up small areas of paint
another day another job completed

After the 4.6 sat down on bump stops, and was then diagnosed with a failed rear sensor ( corroded connection), I got it changed last night, after start up she picked herself up pretty sprightly and was very level all around.

Also got a bulb changed and located the slight burning smell was a sticking caliper, more to do.


P