Recent content by Todd563

That will be your input seal then! Common for them to leak if they have been knocked on refit! also if the surface hadn't been cleaned properly before the seal was replaced. I disagree, silicone is great for stopping leaks and yes you can fit it between the two (t/box and g/box) I do it all the...

If what you meant was the door ''wouldn't'' open then... It will be your lock spring, common problem that occurs, it sits behind your latch on the lock mechanism, take your door card off, unplug your wing mirrors (if electric) undo the bolt at the top left of the door, then on the inside at the...

You Need to completely seal your transfer box, remove your t/box and change the input seal (G/box to T/case) also change the 'O' rings on your Int shaft, and take the sump off the box and clane the surfaces up and seal it using Silicone but let it cure for a couple of hours before adding oil...

Today to me Defener I... Fitted my Mach 5's with some Mastercraft Mud Courser Mt's Then I fitted me Raptor Console with my gauges and new stereo! Gonna give her a wash now! Todd.

I had this problem! I changed all sorts, steering damper, track rod ends, looked at wheel bearings, cv joints and even changed the transfer box! Ended up being the panhard bushes, I couldn't believe it! There cheap and easy to do so might aswell get them changed and see if it make's a...

Was the panard bushes!! Couldn't believe it was them.

I've just had a thought of taking front propshaft off and taking it for a spin in high difflock and see if that cures it and then vice versa with the rear propshaft then it will help to figure out what it could be.

Guys, I own a 300tdi Defender, runs fine but at a certain speed, roughly around 33mph and 45mph it's began to violently shake, I'm talking the whole vehicle shaking it's tits off. I can feel it through the steering wheel also. I originally thought it would be a Steering damper but after fitting...

So if you can lower the rear tubular bracket by 15mm then it will fit fine.

Your rock slider's are wrong pal, well the tube that should sit in the tube on the chassis shouldn't be below the slider, should be inline so that it sits flush on the bottom sil.

Refurbed a second hand door, sprayed it and fitted it. Also bought her a set of mach 5's :)

That's a smart looking landy! Well Done there mate.

Got Mk3 Toyota MR2 Seats in mine, cloth in black, so much more comfortable and look great too, Runners need a slight modification but all that is, chopping ends off as they're a tad too long. Still work fine!

We had our cage custom made. Much better way and got it made for alot cheaper! Best way if you know the right people, can get it exactly how you like it, ours was standard cage but also with an internal hoop and external rear quarters and front and wing tops attaching to the winch bumper. No...

Wish they wasn't so thirsty all the time...