rock slider problems

as it say I'm having problems fitting my new rock sliders, they sit right at the front but 15mm to high at the back

see pics

Your rock slider's are wrong pal, well the tube that should sit in the tube on the chassis shouldn't be below the slider, should be inline so that it sits flush on the bottom sil.

So if you can lower the rear tubular bracket by 15mm then it will fit fine.

well got one side on,
don't know what to do about the other :doh:

whose are they - send em back

Todd563 said:

So if you can lower the rear tubular bracket by 15mm then it will fit fine.

Click to expand...

yes looks like its a cut and re-weld job i thinks :doh:

bmp42 said:

whose are they - send em back

Click to expand...

ebay :doh:

DEFENDER ROCK/TREE SLIDERS land rover landrover 90 NEW on eBay (end time 05-Aug-10 21:36:55 BST)

business seller - so send him an e-mail demanding ones that fit - if no responce report him to ebay -goods not fit for service

Hindsight...should have used iannotts...

both look to be made the same and of good quality, i have sent him email also link here so he can see photo

another thought is maybe the tube on my 90 has been bent ? funny one side fits well and one not ??

told yer to go to feltons and have them custom made

johnlad said:

told yer to go to feltons and have them custom made

Click to expand...

:mooning:

and you only told me after i had bought them :doh:





had a phone call off the chap i got them off, he is more than happy to change or give a full refund

like i said to him i dont think its the way they have been made as one side fits right think it might be the 90

going to try it on another 90 1st