Recent content by stevetd5

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. stevetd5

    Disco 1 Front Door Lock barrel removal

    Hi, WellI have spent a couple of hours and have finally removed the bit of broken scissor!.I think you are right and a couple of the wafers are damaged. I will buy a new barrel and re key as per your you tube feed. Thanks for your help, at least I won't have to unlock the passenger side and...
  2. stevetd5

    Disco 1 Front Door Lock barrel removal

    Hi all I am having problems with my Disco 1 lock. I have it out but the person who tried to steal my car broke off something in the lock barrel. I have removed the circlip and find that as you say the barrel still does not want to come out. Any suggestions appreciated. Cheers Steve
  3. stevetd5

    TD5 won't start after new injector seals ?

    Thanks! I am in Australia but if all else fails I will use my Disco to try the tow start. Cheers Steve
  4. stevetd5

    TD5 won't start after new injector seals ?

    Hi all having the same problem re starting after changing injector seals. Have done all the checks, purges etc. I have noticed that when cranking the fuel gauge is very erratic and I am told there is smoke from the exhaust. I am charging up the battery for a couple of days before trying again...
  5. stevetd5

    2.25 diesel start up after lay up

    Thanks again, getting a handy list:clap2:
  6. stevetd5

    2.25 diesel start up after lay up

    Thanks I had not considered the penetrating oil,adding it to my list!
  7. stevetd5

    2.25 diesel start up after lay up

    Hi, I have a series1 with a 2.25 diesel. It looks to be a reasonable conversion and apparently was running (where have I heard that before) about three years ago!!! It is currently in my shed in another state(700ks) away so I was wondering if anyone has a checklist etc; so I can prepare items...
  8. stevetd5

    2a gearbox to series3 engine

    Thanks all, will give it a try after holidays.Steve
  9. stevetd5

    2a gearbox to series3 engine

    Thanks will do, I had not considered this.
  10. stevetd5

    2a gearbox to series3 engine

    Thanks I'll go ahead.
  11. stevetd5

    2a gearbox to series3 engine

    Hi, Have a series3 engine (2.25)that I am going to use while original is being rebuilt. Is it ok to use 2a gearbox on series 3 style clutch as I don't want to swap original old style clutch pressure plate unless I have to. Thanks
  12. stevetd5

    td5 ecu extension loom

    Hi all, thinking of adding an extension loom to my td5, any suggestions for best price? Thanks
  13. stevetd5

    td5 eu3 egr cooler rad bypass hose

    Hi have just completed fitting egr replacement kit and hoses. Tapped the small plastic coolant hose that carries coolant to/from egr gass cooler and it snapped . This has apparently happened before as there are small pieces of rubber hose joining it. Is it ok to just get a length of steel tubing...
  14. stevetd5

    Melbourne - Perth - Broome - Alice Springs - Adelaide - Melbourne

    Hi Chris When are you planning to travel? Depending on your route you may find some of the more remote areas closed during summer (it appears o/seas tourists were dying too often in the out back) Have you considered an ice box? no battery drain and keep gear cold for days, cheaper too.I'm in...
  15. stevetd5

    engine colour

    Ta some very usefull info esp link to painting
Back
Top