Recent content by mikebeetle
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
-
M
Don't know the part number but if you know the hose internal diameter you could look at something like these
CBS Online Ltd | Hose Connectors - Nylon Joiners, Tee's, Y's, Reducers and Elbows - Tee's
-
M
Only if they are knackered. You will probably find that the spares are the wrong diameter as parabolics generally have a bush with a larger outside diameter.
-
-
M
yep, just done it but not on the road yet. Had to weld a new mount on the rhs chassis as the one for the petrol engine fouled the injector pump
-
M
Do you mean the levers attached to the gearbox? Try looking at the second post down in this forum.
-
-
M
Nice one, thanks. Luckily i have special tool 0001. It has come in useful many times already! I will get cracking tonight
-
M
Hi guys, its been a while but i have finally got the gearbox out. What should be my first step in the rebuild (after cleaning all of the crap off it)?
Will i need any special tools (i have a bearing puller set and access to a press)?
Thanks
-
M
Truck cab with 3/4 tilt or full canvas?
-
M
You've got it driving already? Nice one!
-
M
Just seen this
UK insurers in retreat from side-seat Defenders | Autocar
-
M
Hi all
I am just finishing rebuilding the axles on my S3 88" and am trying to decide wether i should fit RR classic or series diffs.
I will be running 7.50's for the extra ground clearance and is powered by a 2.5TD.
Will i be running the risk of overgearing it and potentially braking the...
-
M
Helped someone from this forum who had the same problem yesterday (albeit a 200tdi). The clutch plate was out of line so we sorted that with an alignment tool i had made up a few years ago.
The wading plug on the flywheel housing was also catching on the gearbox crossmember so just jacked the...
-