Recent content by maverick451
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
-
Thanks for the replies, how do you get access to to this metal cover, is it from the inside of the tub? is it beneath the carpet?
-
Hi guys
Rear Fog on 300 tdi is badly corroded and needs replacing, looking at the old unit in situ, Ive seen the 2 retaining bolts at the back of the unit but im unsure how it connects into the wiring loom? all I can see is a the black wiring sleeve all the way up to floor
Are there connectors...
-
Hi guys
Cant seem to find a definitive answer
Ive got a 1996 300tdi, on the swivel pin housing it has a the drain plug as opposed to later models that just have a filler.
Should I be using EP 80/90? or one shot grease?
-
Hi
Investigating the tapping noise I took out the rock shaft to discover it was broken in 2 places, I just received a new one and am trying to assemble it
I know there are LH and RH rockers but one each one ive noticed a number like b1 b4 b11 b7 b12, does they have any significance? all the LH...
-
Hi guys, im in a bit of mess
Im only a very novice mechanic so bare with me.
The thread for the rear of 3 large rocker shaft studs has stripped, I was tightening the rocker cover back on and it came loose.
When I removed the stud I noticed a previous owner or garage has helicoiled the thread...
-
Steering box adjusted and it feels more solid now in a straight line.
Thanks everyone.
-
Just to update
I ordered a breaker bar and a 6 point socket and it did it with ease.
The WD40 soaking in probably helped aswell.
-
Its a bit oily but it hasnt been painted over, its the 19mm locking nut that just wont budge.
I want to take out a bit of play in the steering, ive done a search and cant seem to find anyone else with this problem.
Ill just have to keep soaking it in wd40.
-
Hi
Ive been servicing my 300tdi today and I wanted to adjust the steering box but damm that locknut is on tight.
I tried with a spanner = no chance so then tried and got socket set and ratchet and still it would not move!
Any ideas? ive sprayed it with wd40 and could keep doing that for...
-
Hi
Ive been trying to remove one of the windscreen spindles because the thread has gone and the wiper arm slips and has even fallen off :D but the grub screw is rusty and wont budge?
any ideas how I can change it??
-
Hi
Not really concerned about looks to be honest.
I want a tyre that is good on the rode in the summer but also very reliable in the winter snow.
-
Thanks
Are AT's ok in the snow?
-
Hi guys
I know you get looks of tyres questions but please bare with me!
I had decided to put on Grabber AT2's but the guy at the garage said he had heard very good things about the newer Grabber AT tyres so I wondered if anyone had tried these or know which is the best to go for?
Thanks
-
Looks great, I take it that isnt a roller job, what type of paint did you use?