Recent content by gooner49

I have tried different relays but same problem, will have to try a new fuse box, could it be a dodgy earth somewhere possibly or pretty much fuse box internals? thanks for help

Thanks, i have changed fusebox, only a second hand one but doing it on both fuse boxes, will try strip it and take a look at weekend

Hope someone could shed some light on this for me as its getting a right pain in the behind, had problems with rangey not starting, when i pulled and pushed relays in and out it seemed to come to life, i have now traced it to relay 19 which on here P38 Range Rover Engine Bay Fuse Box Fuse and...

Thanks for replies lads, will try some injector cleaner, hopefully its a simple fix

Sorry, it's a 2.5 diesel on a p 98

Hi guys, another problem with p38, on idle it hunts quite badly, enough for it to try and pull away and rock the whole vehicle, also when driving at just under 2000 revs it really holds back and jerks whole vehicle quite violently if you hold those revs, all other rev range fine, all i have...

cheers will make sure filter changed etc, and will take a look at compressor

i owned it for about 2 years nearly, i have never changed tf oil, got it booked in for service this week, does oil need draining and new oil put in or just topping up if needed? compreesor pumps away like a goodun, just sometimes comes up quick and sometimes 5-10 mins

not sure if a common thing but on my 98 p38td sometimes when you start and drive away it seems really sluggish and high revs kind of like slipping clutch but if pull over turn off and restart its fine. secondly sometimes eas can take about 10 mins to come up other times almost straight away, ny...

was only going to put rr one on because its meant to be on, since omega one fitted seems to hunt which it didnt before and doesn't seem to have quite as much power as before, apart from that its fine, a friend has a rovacom lite but not sure if he has engine software which i preume it would...

Not sure mate, what happened was had starting issues, someone moved original ecu and arked it out so blew it up, had an omega one laying about so tried it and worked fine, have now got an rr one and thought cpould swap straight back but as said only turning not firing, thanks for replies

Hope someone can help, at present i have i believe an omega td ecu on my p38, i have got hold of a rr td ecu to replace it with, problem is when i put it on the car turns over but wont fire, does it need setting up to rest of car? will rovacom do this? thanks

thanks will check at weekend

thanks again Derek, not seen it myself to be honest, just telling someone today how helpfull people have been on here and helped me get mine almost back to normal and he asked me to see if anyone had any ideas on here, as far as i know the motor wont move at all the black box just clicks

not on my range this time thank god, on another p38 the driver side window wont go down, just hear a click coming from black box behind door panel, have tried another one of those also the window switch and also plugged electric motor into another window and works fine, any suggestions please?