ecu swap
- Thread starter gooner49
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,023
- Location
- Near Poitiers SW France
Yes it will need the BECM handshake to the engine ECU set up.
Not sure mate, what happened was had starting issues, someone moved original ecu and arked it out so blew it up, had an omega one laying about so tried it and worked fine, have now got an rr one and thought cpould swap straight back but as said only turning not firing, thanks for replies
Datatek
Well-Known Member
- Posts
- 45,023
- Location
- Near Poitiers SW France
If the Omega one works, why swop it out? The engine ECU can be set up from new to require an immobiliser code or to work without a code. The Omega one is presumably set to work without a code.
was only going to put rr one on because its meant to be on, since omega one fitted seems to hunt which it didnt before and doesn't seem to have quite as much power as before, apart from that its fine, a friend has a rovacom lite but not sure if he has engine software which i preume it would need, think he just got it for eas
Last edited:
nisbeam
Active Member
- Posts
- 201
- Location
- down in Cornwall
You could phone here for some advice. They will check or fix as necessary & return your unit with a unique label & numbered report. Only handling charge if no work, but I found them happy to help & advise over the phone... dodgy looking website though but that is not their forte is it 
The ECU Doctor
The ECU Doctor
