Recent content by denrr1

Have a look on the mot history web page.its a government ran site and all you do is type the reg in.

Mine was the roof bars leaking in causing a puddle above the sun visor.

Spot on.the sensor was not seated properly and a gentle tap sorted it .thanks for your help.

hi all could anyone give me some advice with a problem i seem to have started. it started when some scrote decided to try to help himself to one of my rims fitted with a new all terrain tyre. the locking wheel nut was sheared off and the rest were slackened. i found this out the hard way doing...

hi all, got into car to come from work tonight and when i unlocked it i noticed the hazards did not flash.tried locking it and the lights flashed as normal but again nothing on the unlock. also the radio started to switch itself off when any electrical item was used ie indicators or lights. have...

hi all, can anyone reccomend some front seat covers?. i got a full set last year but were a thin nylon and the two fronts are badly torn. i have seen some in a car in a car park that look thicker and seem to be a snug fit on the seat,but do not have a clue where to get any as all the ones on the...

hi all, looking at a new car for the wife and have seen a freelander local. its a 2003 td4 with 90k miles. up for £3400. is this a decent price for a private sale?. what should i be checking on it?. i have a 300 tdi so know my way round mechanical bits. cheers.

hi all, it seems that the mount on the left side of the transfer box (passenger side) has been badly shimmed where it touches the box not the chassis. is this normal?. is it worth changing them both for new ones?. rubbers are still soft but i am not really sure how much give they should have...

once again spot on help and advice. have ordered the plug. thanks to all.

hi all, managed to get a towbar yesterday for next to nothing but it had no electrics with it.does anyone know where to get the socket and harness plug,or would it be easier to buy a non landrover one and solder it up as i have found the wiring colours etc when i did a search. many thanks den

do a search and there is a thread that tells you how to repair it by drilling the rivets out and replacing them with bolts. i know it works as i did mine and not a drop has leaked since.:)

a guy on here who i also work with uses tanfield 4x4 and seems to have had good service from them.also cheviot 4x4 at tyne tunnel ind est.

do a search as im sure there is a thread with pics on how to repair this. mine was a dry solder joint on the circuit board behind the glove box,but was sorted following the thread.the picture even shows you which joint will need resoldering. "Repair a Land Rover Discovery electric window ECU to...

that will have to wait till monday!!!!

have you ****ed the bed this morning??