Recent content by Bonzo

Just had my S111 through the MOT only problem was the exhaust which was rotten in a number of areas. The exhaust was fitted and all well. The garage said they had to fill around the manifold and top of the exhaust pipe to get a seal. (Gum Gum ) I bought the full kit from Bearmach. Now the gum...

Welcome to the world of S111. My kids love it. I got them involved in stripping it down and painting it and they love it. Seat belt wise I have 2 inertia in the front and a lap belt in the middle. in the rear I have 4 lap belts all from exmoor trim. This year we have gone topless and it is so...

Thanks for that. Been over a few times now and have fallen for the open roads and wine. Looking to drive the landy on a perm basis and think I need type approval. Would love to hear from anyone who has done this or advice. Many thanks Tony

We are planning to move to France in the next couple of months and want to take our 1976 s111 with us. Does anyone have experiance of doing this. Any advice greatly appreciated. Thanks Tony

Many Thanks Now I now it could be usefull I shall investigat further. Thanks Tony

this is the llink any views appreciated Thanks Tony ebay.co.uk/Breaking-Series-3-landrover-110-parts-for-sale_W0QQitemZ190372125821QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2c53101c7d

Dear All May have a chance of a local bulkhead off a S3 110. Will it fit a S3 88" Many Thanks In Advance Tony

Dear Dean I would also like to know how it goes. Did you fit it yourself. I have a gearbox that works well but is noisey in 1st,2nd and 3rd but is quiet in 4th. The more work I do on her the more I drive it. So interested in any upgrades which work. Thanks Tony

I had the same problem over the summer the indicators and main beam seemed to work only when they wanted. I took the stalk off cleaned all the conections with a fine file. Checked and cleaned all the earth points checked the connectors and cleaned them including the ones between the radiator...

Thanks for the replies I will let you know how I get on. Thanks Tony

I am looking to take my bulkhead off early spring due rust around the vents. The repair patches will not cover the rust/holes. Other areas look fine. Can anyone recomend someone who could carry out the repairs once off. Looked at new ones which are galvanised but way to expensive. Thanks in...

Just moved to the bridgwater area from S Wale (Brecon Area) With my Series 3. Just got it on the road so only managed 1 run on Sarn Helen from Neath to Banwen when it was opened. I would love to hear of any local lanes on the Quantocks. It is up the road. When I drove the Landy into bridgwater...

Thanks for the advice. I stripped the carb down this morning and double checked everything and the manifold. I also changed back to the old jet and did a visual check on the bore size and the jet which came with the refurb kit looked bigger. Put it all back together with old jet and it ticks...

Dear All A couple of problems which is driving me mad. I have started to get a lot more misfire at the moment I have reset the points but still goes on. In addition when I come to a stop the engine will cut out even when warm. When started again it will start and run on tickover all day long...

Confused So which show ??? Tony