TrigonBill
New Member
- Posts
- 27
- Location
- Dorset
Just got a 300tdi and am sorting for farm use. Have fitted a set of roof lights but am wondering where to run the wires for them - help!
Wiring route for roof lights
- Thread starter TrigonBill
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,296
- Location
- Embasinga stocæ
down A-pillar, into wing and into engine bay. from there into cab.
sypher
Well-Known Member
- Posts
- 1,997
- Location
- Forest of dean
Or if you dont mind drilling the roof - fit some of theses M20S 20MM IP68 NYLON CABLE GLAND x 10 (6-12mm) on eBay (end time 15-Sep-10 11:11:34 BST)
got one tucked behind the lightbar on my roof , and it dont leak
got one tucked behind the lightbar on my roof , and it dont leak
Shifty1962
Well-Known Member
- Posts
- 4,209
- Location
- The Winchester Club - Englandshire
Me too. Simple and effective.Or if you dont mind drilling the roof - fit some of theses M20S 20MM IP68 NYLON CABLE GLAND x 10 (6-12mm) on eBay (end time 15-Sep-10 11:11:34 BST)
got one tucked behind the lightbar on my roof , and it dont leak
Boris113
Well-Known Member
- Posts
- 1,356
08Mckerp ran his along behind the dash, up the plastic trim on the inside of the windscreen then fitted 2 little rubber grommets at the top of the frame where the cable exited. If you later remove it, 2 rivets will fill the holes so it still looks neat.
Harry
Harry
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
out the woof using rubber grommet
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
I did this..and regret it a bit. You need to put a connection in the cab if you want to take the roof off in summer, i forgot.
TrigonBill
New Member
- Posts
- 27
- Location
- Dorset
Great - thanks all
