Window motor

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

deadagain

New Member
Posts
20
Hi all new on here.

Quick question,

Is is possible to change the window motor on my FL1 whilst the mech is still in the door.

There does appear to be anything else wrong with the window other than the motor appears not to be working.

Cheers
 
Hi,

Not really, as you have to remove the rails, unwind the cables from the motor and then try to reassemble it again, which would be like making a ship in a bottle. Why would ya want to? Fairly easy to remove the unit from the door, with a little bit of wiggling and patience. My top tip is to have the winder most of the way down, wind the long cable onto the drum and tape in place around the casing entry point and then wind the shorter cable on the drum. Then jam the lid back on before it all springs out like a jack-in-the-box. :D
 
Back
Top