BNOP5
New Member
- Posts
- 5
- Location
- Wisbech (wisbekistan)
Hi guys.
Relatively new on here...
Ok...So I had the water pump and head gaskets replaced, skimmed head,new bolts etc....on 4.0 gems.
Then 5 days and 100 miles later it starts smoking from exhaust..(white/grey) more when upto temp.
Breather pipes/oil separator replaced..
No water loss.....20 m.p.g.
At a loss here guys....
Oh and the fuel regulator is missing the vacuum to chamber hose....
It's going back to same garage that done other work so they can sort it but I'm unsure of there ability bearing in mind The smoke and oil use......
Thank you in advance
Peter
Relatively new on here...
Ok...So I had the water pump and head gaskets replaced, skimmed head,new bolts etc....on 4.0 gems.
Then 5 days and 100 miles later it starts smoking from exhaust..(white/grey) more when upto temp.
Breather pipes/oil separator replaced..
No water loss.....20 m.p.g.
At a loss here guys....
Oh and the fuel regulator is missing the vacuum to chamber hose....
It's going back to same garage that done other work so they can sort it but I'm unsure of there ability bearing in mind The smoke and oil use......
Thank you in advance
Peter
