Which Bull Bar For A Facelift TD5 02?

I've just managed to convince the wife to let me put a bull bar on the Disco but she's insisting on the smaller plastic ones that came with Land Rovers. Will one of these fit a facelift TD5, also what do I need to be looking for? Will it just bolt straight on or does it need a mounting kit?

As always, thanks in advance my friend.

had a chrome a frame on mine havent got round to puting it back on after bump. There are brackets for end of chassis rails and holes cut in bumper. Looks better than the soft a frames.

Only two from Land Rover parts listed. Protection bar STC50020, A-frame STC50021

I wanted a chrome one but the wife has put her foot down......so I found a place on eBay (based in Poland) that make briliant chrome ones and can be painted to the colour of your choice. She's all about colour coordination and doesn't fancy the silver shining through due to it being a dark vehicle (Epsom Green). I don't want a massive one, just one low enough to not reach the level of the bonnet, maybe to the bottom of the headlights would be good.

i have just had a look for some pictures of it but on wrong comp will get missus to check her comp and post you a picture mate with it on.

discool said:

Only two from Land Rover parts listed. Protection bar STC50020, A-frame STC50021

Click to expand...

That's the one she likes, the A-frame STC50021. Only one on eBay and it has to be collected from Liverpoolwhich is way too far away from me. Need one local to Wales or willing to post. Will that one fit a facelift D2?

thought it was mine! said:

i have just had a look for some pictures of it but on wrong comp will get missus to check her comp and post you a picture mate with it on.

Click to expand...

Cheers butty.

I'd be going for the plastic LR A-bar if just wanting something for the looks.

Otherwise, I like these the most

Extreme 4x4 Ltd DISCOVERY 2 FRONT WINCH BUMPERS

Will be getting one for my dads Disco soon and fitting my winch to it when I upgrade the winch on the front of the 110

plastic ones are pretty rare now, i got a new 1 off ebay 12 month ago, have put brackets on, had to take bumper off to get em on so waxoyled all front whilst it was off, still havent got round to putting bar on thou

the 1 on ebay, says organise your own courier, parcels to go!

Yes, the one on eBay looks a bit ****ty to be honest. Shame there's no more new/old stock about. I think i've talked the wife into a proper one now.

how about this LAND ROVER DISCOVERY II 98-03,A BAR,NUDGE BAR,BULL BAR, | eBay

thought it was mine! said:

how about this LAND ROVER DISCOVERY II 98-03,A BAR,NUDGE BAR,BULL BAR, | eBay

Click to expand...

That looks the part but it's collection in person only.

We've chucked both of ours away off our V8's. By the time people hang two bl**dy great Wipac spots on the front, oil cooler, gearbox oil cooler, air con radiator as well, it's no wonder they had overheating problems!

Look far better without IMO.

Peter

chrispy said:

That looks the part but it's collection in person only.

Click to expand...

landy courier service ask the question

Sounds good, you've been a great help my friend. What price would you suggest I go to for it? Don't want to overspend obviously.

Hi all, i have been looking for a large chrome Bull Bar for my Face lift TD5 04 for the past year!!! New or used as long as its in good condition. Can anyone help me.

Chrome - wtf!!

auf_wiedersehen_pet said:

Chrome - wtf!!

Click to expand...

if you look at crispys pic he has stainless side steps so chrome would be match in

thought it was mine! said:

if you look at crispys pic he has stainless side steps so chrome would be match in

Click to expand...

How many rust covered chrome accessories do you see?

auf_wiedersehen_pet said:

How many rust covered chrome accessories do you see?

Click to expand...

sorry mate ment to say stainless would match in doh!!!!