Wheel spacers?

I lOvE mY lAnDy · Oct 9, 2012

I am making 30mm wheel spacers in work but need the measurements. Does anyone already know threasurements? PCD, Overall dia, spigot dia and wheel stud thread size?

Sent from my GT-I9100 using Tapatalk 2

Glb8686 · Oct 9, 2012

5*165 70.1 c/bore according to the internetz

But i'd get the mics out and get measuring to be sure

I lOvE mY lAnDy · Oct 9, 2012

5 x 165mm is this the Wheel stud PCD? And is the 70.1mm The diameter of the hub spigot?

wiltshire landyman · Oct 9, 2012

try google it aint to difficult

auf_wiedersehen_pet · Oct 9, 2012

I'm looking forward to some finished photos.

I lOvE mY lAnDy · Oct 10, 2012

I have googled it and cant find measurements anywhere. And as soon as i have made them i will post some pictures

Glb8686 · Oct 10, 2012

Can you not whip a wheel off and get measuring rather than taking out word for it?

Mr Noisy · Oct 10, 2012

Threads M16 x 1.5.

Centre bores on spacers tend not to sit tight against the spigot, they are located on the nuts, same story for steel wheels and a lot of alloys.

TBH the PCD is so large and the studs so hench they dont really need a spigot!!!

I lOvE mY lAnDy · Oct 10, 2012

I took the wheel off but my vernier is only 8" and the jaws arnt long enough. Looks like ill be using the steel rule......

Sent from my GT-I9100 using Tapatalk 2

The Mad Hat Man · Oct 10, 2012

I lOvE mY lAnDy said:
Sent from my GT-I9100 using Tapatalk 2

Diesel Do · Oct 10, 2012

The Mad Hat Man said:

Sent from Basingstoke using a commodore 64!

Mr Noisy · Oct 11, 2012

Yeah could do with turning that auto-sig off!

Wheel spacers?

I lOvE mY lAnDy

New Member

Glb8686

Active Member

I lOvE mY lAnDy

New Member

wiltshire landyman

I’m back

auf_wiedersehen_pet

Well-Known Member

I lOvE mY lAnDy

New Member

Glb8686

Active Member

Mr Noisy

Coming in your ears.

I lOvE mY lAnDy

New Member

The Mad Hat Man

Well-Known Member

Diesel Do

Well-Known Member

Mr Noisy

Coming in your ears.

Similar threads