Disco 1 What is a D1/D2's power steering hydraulic pressure?

Looking at doing an engine conversion, and would like to check the new engine's PS pump is compatable with the landy's steering box requirements, so was wondering if anyone knew what is the working pressure of the steering box, or what pressure the power steering pump supplies? And if we're going for bonus points don't suppose you'd know the flowrate? Thanks in advance /Jay

For the D1 power steering pump
Make/type - V8i ................................................................ ZF ’Unicorn’
Make/type - Tdi ................................................................ Hobourn Eaton 500 series
Operating pressure - straight ahead position - at idle ...... 7 bar, 100 lbf/in2 maximum
Full lock (left or right) at idle ............................................. 28 bar, 400 lbf/in2 minimum
Full lock (left or right) 1000 rev/min .................................. 70-77 bar, 1000-1100 lbf/in2

Dont need the bonus points so i'll pass on the flow rate info.

And this is for the D2 -